Some car spare parts may cause the water into the car easily

Air intake is the most easy to let the car water parts, because the air inlet most cars are located on the front windshield below, although a waterproof cover and a drain tank, but the drainage groove by some impurities (such as leaves, foreign) blocking time water will overflow the waterproof cover plate from the air inlet into the car. But don’t worry, if only a small amount of water from the air inlet into the car, the first water will encounter is the air filter, air filter is because the paper will absorb the moisture, but too much from the inlet water, the water will pass through the air filter into the car.

The roof is a very easy to fill the part, because the pollutants in the environment will cause the roof drainage channels blocked, resulting in internal rainwater into the vehicle, the vehicle interior damage. Roof drainage we said tube four angle generally located in the roof, roof drainage groove and connected with drainage holes located near the door or around fender board. We therefore before the advent of rainy season best to check some of these places.

Vehicle door sealing tape un-tight sealing or sealing tape missing an important reason for the vehicle inlet. The car parked in the water, because the car is not the same as the internal and external pressure, water will be “pressure” into the car. But this is not to say that your car door sealing tape to avoid such problems, such as your door sealing tape is soft, sealing tape aging or door lower no sealing tape, these conditions will let the water from the car door into the car.

These views are important,if you want to your car more better,you need choose good car diagnostic tool to equipped with your car.

CT100 Injector Cleaner & Tester Description:
Best price CT100 Injector Cleaner & Tester same as Launch CNC602A .CT100 Injector Cleaner & Tester’s function is the same as the Launch CNC 602A Injector Cleaner . With English panel .The volume of CT100 is only one half of CNC602A.

Model: CT100
Weight: 20.5KG

CT100 Injector Cleaner & Tester Functions:
1. Ultrasonic cleaning
2. Idling/ medium speed/ high speed/ accelerating/ shifting speed/ leakage test
3. Idling spray value/ medium speed spray value/ high speed spray value test
4. Free dismantle cleaning
5. Reverse flush

CT100 Injector Cleaner & Tester Main Features:
1. LED display
2. Build-in ultrasonic cleaning tank (with optional heating function)
3. Siemens oil pump
4. CE certificate
5. Simulate situation of fuel injector when engine accelerating and deceleration
6. Test the shortest cycle of fuel injector on & off, test by time.
Test leakage, block, pulverization and spray angles of fuel injector, also test spaying amount and spraying uniformity of every injector.
7. Tool trolley makes it convenient to use.

The benefit of the car’conditioning open the outer circulation

In the air quality is very good environment, opening the outer loop can let fresh air into the car. In addition, when the wind model is adjusted to the front windshield fog except when the open cycle mode, the demisting effect will be more obvious, many equipped with automatic air conditioning models in adjusting to except fog mode will automatically switch to the outer circulation.

Many of the people in the use of automobile air conditioner, air mode is a fixed, even long-term fixed, this is not a good habit. The vehicle every outlet has its effect, according to the different use of the environment to adjust the air mode is very necessary. For example, if the front windshield has been covered with mist, then continue to use to blow the cockpit mode is a delay happened.

In addition, even if there is no fog effects such as driving, we in long distance running, every other period of time also need to consciously adjust the air mode, it also helps to hot or cold air circulation in the car. If you use only one air mode, is likely to be hot head feet cool or hot feet cool head.

Good maintenance play an important role in car,but truck repair tools are necessary.

KWB-402 Description:
The KWB-402 wheel balancer features compact size, good design, simple operation, strong functions and high measurement precision. It can also be a great help in car repair garage and tireshops.

Advantages of KWB-402
*Manual measuring scale(manual input of values)
*Static and four modes dynamic balance inspection both with compensation
*Indication of imbalance both in grams and ounces
*Locking wing nut reduce time of mounting and demounting wheel
*Precison of imbalance up to 1 gram
*Automatic correction and memorization of structural parameters
*Optional universal clamping fixture for different type of wheels
*High precision indication

Functions:
*Quick and accurate measurement of imbalance value.
*Automatic inspection of dynamic balance (in four modes) and static balance,both with compensation.

KWB-402 Specification:
*Rim Diameter:10~22(254–558mm)
*Rim Width:1.5~18(38–457mm)
*Balancing precision:1g
*Cycle time:7s
*Power supply:220V/110V 50Hz/60Hz
*Motor Power:180W/370W
*RPM:240rpm
*Working noise:<70dB(A)
*Temperature:0~50
*Humidity:=<85 pecentage
*Max. Wheel Weigh:65kg
*Dimensions:1200*1000*1350mm

The use of automotive air conditioning inside and outside circulation

Automotive air conditioning internal circulation regulation is very important, don’t neglect. At present, most parts of the country is the haze weather, PM2.5 numerical high people seriously worried about his health. So in driving the serious pollution of the weather, must pay attention to adjust for the inner loop state.

In addition, when you continue to change when the temperature inside the car, especially refrigeration, switching to the internal circulation than the temperature set to minimum has direct effect. For some models also equipped with automatic air conditioning, inner, outer loop automatic switching function, so it need to pay attention to the function of the state.

Of course, most of the automatic air conditioning and the following additional features: 1, when you will set the temperature is low, will automatically switch to the internal circulation, accelerate the temperature decrease speed, when the temperature drops to the set value and then switched to the outer circulation; 2, when you will change the mode to adjust the front windshield demisting mode, will automatically switch to the outer loop, speed up the mist speed; 3, part of the automatic air conditioning models in the hang into the reverse gear air-conditioning will automatically switch to the internal circulation, prevent tail gas is to be sucked inside the car.

These views are important,if you want to your car more better,you need choose good car diagnostic tool to equipped with your car.

Original Launch EA3000 portable engine analyzer Description:
Launch EA3000 portable engine analyzer is a professional tool for the test of overall performance of vehicle engine.
EA3000 is made of state-of-art computer, smart trolley stand and various adaptors & cables.

Functions of Launch EA3000:
The innovative device is capable of testing working conditions, operation parameters of engine by capturing the primary and secondary ignition signal, injection signal and sensor signal in real time and supports integration of several other devices: emission analyzer, smoke meter, test lane, as well as diagnosis scanner.
The analyzer can play, save, recall and print out test results that can be used in engine status judging and problem finding. The built-in help system keeps manufacturer technical data of more than 2000 vehicle models.

Specifications of Launch EA3000:
Parameter Range Precision
RPM 0~8000rpm 1%
Ignition ADV 0~60° ±1°
Ignition voltage 0~40KV 5%
Spark voltage 0~4000V 5%
Ignition duration 0.04~9.99ms 0.04ms
Cranking current 0~900A 5%

It is very important to maintain a safe speed

The huge traffic holiday high speed road, not speeding will be safe. According to the traffic flow of different, sometimes we need to reduce speed to ensure adequate safety. Light to maintain a safe speed is not enough, while maintaining a safe distance. Now the way a lot, in time for the Spring Festival on the road, everyone was eager to go home, really can not guarantee a second front appeared what accident, technology and safety are you kidding don’t take a car, from the “they” away, to ensure that they have sufficient reaction time in times of emergency.

In the face of a high-speed car traffic free may appear to increase, many friends choose the night or early morning to go out, the use of lighting is a must. Advance vehicle inspection before going out, reasonable use of lighting is very important. Recommended travel friends set out to service station for inspection and maintenance comprehensive, eliminate safe hidden danger, reassure yourself travel.

Once the traffic accident, there is no need to panic, will be the first time the car off the road, open the double flash warning lamp, at the same time, in accordance with the provisions of stacking warning signs, car evacuated to the roadside safety, if the parking in the emergency parking area highway, personnel must be evacuated to the roadside fence outside, to avoid the occurrence of two accident.

Good maintenance play an important role in car,but truck repair tools are necessary.

Launch CNC 602A Injector Cleaner Description:
Launch CNC 602A Auto Fuel Injector Tester and Cleaner(launch cnc 602a,cnc 602a)
CNC-602A is an advanced electromechanical product, which can clean and test injectors by simulating engine working conditions. It can also perform cleaning on the injectors and fuel supply system on vehicle.

Launch CNC 602A Injector Cleaner Specification:
Power supply: AC220V10%, 50/60Hz(110V-220V only need a voltage converter, we can provide the transformer.).
Input power: 250W;
Ultrasonic cleaner power: 100W;
Simulated RPM range: 109990rpm; step: 10rpm;
Time range: 19999s;
Pulse width: 0.525ms; step 0.1 ms;
Fuel tank capacity: 4700ml;
Dimensions: 385mm410mm500mm;

Launch CNC 602A Injector Cleaner Functions:
- Ultrasonic cleaning: To perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector completely.
- Uniformity/Sprayability test: To test the uniformity of injecting amount of each injector, and to monitor the spraying status of each injector with the help of backlight. This test is also for reverse flush.
- Leakage test: To test the sealing and dribbling conditions of injectors under system pressure.
- Injecting flow test: To check the injecting amount of the injector in 15 seconds of constant injection.
- Auto. test: To test injectors by simulating different working conditions.
- On-vehicle cleaning: The unit is equipped with various adaptors and couplers that facilitate cleaning on the injectors on vehicle.

Launch CNC 602A Injector Cleaner Spare Parts:
- 105020217 CNC pulse signal connection cable 1,T=0.5
- 105020218 CNC pulse signal connection cable 2,T=0.8
- 103260037 Ultrasonic cleaner assembly 100W
- 106030038 On-vehicle adaptor package(tool kits)
- 107010428 CNC-602A user manual(En&Ch)
- 103250013 Top-supply connector 1
- 103250015 Swiss thread adaptor for fuel top-supply injector
- 103250016 Coarse thread adaptor for fuel top-supply injector
- 103250018 CNC-601/801 Hexangular stopper
- 104990012 CNC-801 BUICK injector adaptor
- 199010019 Injector testing liquid
- 307030024 Injecter detergent

Icy road driving cautions

When the vehicle runs on the icy pavement, the vehicle braking distance will than dry road long braking distance. Passed before my colleagues experimented (click here to see the original), using all season tires on the ice and snow road from 40km/h down to 5km/h 21.1m, almost equivalent to 70km/h in dry road down to a desired distance, and in the snow and ice road 100km/h down to a braking distance of more than 150m.

Even if the replacement of the winter tires, also only in a limited scope to improve braking performance, and in most parts of the country, consciously change winter tires owners only a very few, most people are all season tires for the winter, so we need more attention, driving on icy roads, speed not too fast and keep enough distance, is a good way for reducing the accident rate.

On the ice road driving a vehicle, is easy to appear not brake the car or vehicle slippage etc.. So, when driving a vehicle, attention should be paid to smooth driving, and the car in front of the vehicle distance should be two times the normal, in order to early detection and timely response. At the same time try to keep driving straight, don’t frequent change, overtaking.

These views are important,if you want to your car more better,you need choose good car diagnostic tool to equipped with your car.

CT100 Injector Cleaner & Tester Description:
Best price CT100 Injector Cleaner & Tester same as Launch CNC602A .CT100 Injector Cleaner & Tester’s function is the same as the Launch CNC 602A Injector Cleaner . With English panel .The weight and volume of CT100 is only one third of CNC602A.

Model: CT100
Weight: 10KG

CT100 Injector Cleaner & Tester Functions:
1. Ultrasonic cleaning
2. Idling/ medium speed/ high speed/ accelerating/ shifting speed/ leakage test
3. Idling spray value/ medium speed spray value/ high speed spray value test
4. Free dismantle cleaning
5. Reverse flush

CT100 Injector Cleaner & Tester Main Features:
1. LED display
2. Build-in ultrasonic cleaning tank (with optional heating function)
3. Siemens oil pump
4. CE certificate
5. Simulate situation of fuel injector when engine accelerating and deceleration
6. Test the shortest cycle of fuel injector on & off, test by time.
Test leakage, block, pulverization and spray angles of fuel injector, also test spaying amount and spraying uniformity of every injector.
7. Tool trolley makes it convenient to use.

CT100 Injector Cleaner & Tester SPECIFICATIONS:
Turning speed range: 0~7500r/min
Timing pulse iength:  0~9900times/step length 100
Pulse iength: 0-20ms step length 0.1ms
Timing:0~10min
System pressure:0~0.6Mpa
Ultrasonic cleaning power:70W
Power supply:AC220+-10% 50/60Hz
Working temperature:10°C~40°C
Stimulant signals:  0+-5V
Output scope of the pulsed signals: +5V,+12V
Mainbody MEAS:38*30*39 CM:10Kg

After a free maintenance period, the driver should go to where maintenance it?

It was suggested to the 4S shop, some say the best to the comprehensive vehicle maintenance plant. In the end which is more appropriate?Whether you choose the 4S store or comprehensive automobile repair factory they have advantages and disadvantages of each.

First look at the 4S store, it is brand of car manufacturers specify maintenance repair shop, large investment, service environment is good, spare parts provided by the automobile manufacturers and special maintenance and repair equipment, tools, the manufacturers of training skilled workers, there is a certain guarantee of the brand of automobile maintenance and repair quality. But the 4S store is exclusive, only repair the manufacturers specify the brand, and the spare parts and the price is relatively high.

Comprehensive car repair workshop can be maintenance of various brands of cars, spare parts purchased from the market, equipment and human resources are fully utilized, and thus maintenance and repair price is relatively low, but within a certain time on the technical and performance automotive brand mastery than 4S shop.

Nowadays,high quality car tools is becoming more and more less,so how to choose good mileage correction tools is a challenge.

Launch CNC 602A Injector Cleaner Description:
Launch CNC 602A Auto Fuel Injector Tester and Cleaner(launch cnc 602a,cnc 602a)
CNC-602A is an advanced electromechanical product, which can clean and test injectors by simulating engine working conditions. It can also perform cleaning on the injectors and fuel supply system on vehicle.

Launch CNC 602A Injector Cleaner Specification:
Power supply: AC220V10%, 50/60Hz(110V-220V only need a voltage converter, we can provide the transformer.).
Input power: 250W;
Ultrasonic cleaner power: 100W;
Simulated RPM range: 109990rpm; step: 10rpm;
Time range: 19999s;
Pulse width: 0.525ms; step 0.1 ms;
Fuel tank capacity: 4700ml;
Dimensions: 385mm410mm500mm;

Launch CNC 602A Injector Cleaner Functions:
- Ultrasonic cleaning: To perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector completely.
- Uniformity/Sprayability test: To test the uniformity of injecting amount of each injector, and to monitor the spraying status of each injector with the help of backlight. This test is also for reverse flush.
- Leakage test: To test the sealing and dribbling conditions of injectors under system pressure.
- Injecting flow test: To check the injecting amount of the injector in 15 seconds of constant injection.
- Auto. test: To test injectors by simulating different working conditions.
- On-vehicle cleaning: The unit is equipped with various adaptors and couplers that facilitate cleaning on the injectors on vehicle.

Launch CNC 602A Injector Cleaner Spare Parts:
- 105020217 CNC pulse signal connection cable 1,T=0.5
- 105020218 CNC pulse signal connection cable 2,T=0.8
- 103260037 Ultrasonic cleaner assembly 100W
- 106030038 On-vehicle adaptor package(tool kits)
- 107010428 CNC-602A user manual(En&Ch)
- 103250013 Top-supply connector 1
- 103250015 Swiss thread adaptor for fuel top-supply injector
- 103250016 Coarse thread adaptor for fuel top-supply injector
- 103250018 CNC-601/801 Hexangular stopper
- 104990012 CNC-801 BUICK injector adaptor
- 199010019 Injector testing liquid
- 307030024 Injecter detergent

Car computer control system should be how to repair

1.Prohibited when the engine is running the battery cable is disconnected, to prevent loss of load caused by high voltage generator damage your computer.When the engine fault light (CHECKENGINE) is lit,before the fault not repair do not disconnect the battery line to prevent the trouble code stored in the computer is clear. Difficult to repair.

2.Prohibit the use of multi-block battery in series or turn on the power to start the vehicle.Forbid doing high-voltage wire jump fire experiment, in order to avoid self potential damage to the computer. Vehicles to burn welding, should first disconnect the battery cable. Remove the computer. For most car engine computer have permanent power supply, prohibited before disconnecting the battery assembling computer, in order to avoid self potential cause damage to your computer.

3.Do not plug the engine running with the inductive nature of computer related components. In the detection of computer components to use digital multimeter, using resistance 20K Ω above high resistance multimeter testing such as the use of pointer multimeter test computer related devices. There is no absolute certainty case do not use test lamps to test any and computer related devices.

These views are important,if you want to your car more better,you need choose good car diagnostic tool to equipped with your car.

Launch CNC 602A Injector Cleaner Description:
Launch CNC 602A Auto Fuel Injector Tester and Cleaner(launch cnc 602a,cnc 602a)
CNC-602A is an advanced electromechanical product, which can clean and test injectors by simulating engine working conditions. It can also perform cleaning on the injectors and fuel supply system on vehicle.

Launch CNC 602A Injector Cleaner Specification:
Power supply: AC220V10%, 50/60Hz(110V-220V only need a voltage converter, we can provide the transformer.).
Input power: 250W;
Ultrasonic cleaner power: 100W;
Simulated RPM range: 109990rpm; step: 10rpm;
Time range: 19999s;
Pulse width: 0.525ms; step 0.1 ms;
Fuel tank capacity: 4700ml;
Dimensions: 385mm410mm500mm;

Launch CNC 602A Injector Cleaner Functions:
- Ultrasonic cleaning: To perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector completely.
- Uniformity/Sprayability test: To test the uniformity of injecting amount of each injector, and to monitor the spraying status of each injector with the help of backlight. This test is also for reverse flush.
- Leakage test: To test the sealing and dribbling conditions of injectors under system pressure.
- Injecting flow test: To check the injecting amount of the injector in 15 seconds of constant injection.
- Auto. test: To test injectors by simulating different working conditions.
- On-vehicle cleaning: The unit is equipped with various adaptors and couplers that facilitate cleaning on the injectors on vehicle.

Launch CNC 602A Injector Cleaner Spare Parts:
- 105020217 CNC pulse signal connection cable 1,T=0.5
- 105020218 CNC pulse signal connection cable 2,T=0.8
- 103260037 Ultrasonic cleaner assembly 100W
- 106030038 On-vehicle adaptor package(tool kits)
- 107010428 CNC-602A user manual(En&Ch)
- 103250013 Top-supply connector 1
- 103250015 Swiss thread adaptor for fuel top-supply injector
- 103250016 Coarse thread adaptor for fuel top-supply injector
- 103250018 CNC-601/801 Hexangular stopper
- 104990012 CNC-801 BUICK injector adaptor
- 199010019 Injector testing liquid
- 307030024 Injecter detergent

Cotton silk and butter together to remove the transmission main shaft bearingCotton silk and butter is one of the most common things in the garage. In the repair, many people put the silk cotton is only used to wipe your hands, put the butter just used to lubricate. If the cotton silk and butter combine to remove the transmission main shaft bearing, they can “each improves by association with the other”, come in handy. The operation is very simple: within a large lump of butter into the bearing, the butter cotton plug into the bearing inner sleeve, until the plug is not into the cotton silk. Then use an iron bar to cotton silk with a hammer hit the bars along the axial direction. When the cotton silk smashing down, to the bearing inner plug of cotton yarn, so repeatedly, the bearings will be squeezed out. This method is suitable for any vehicle with a guide bearing. Cotton silk and butter by “squeeze,” beat “will unite in a concerted effort”, the force applied to the bearing. Grease into the bearing end, extrusion bearing. Cotton yarn in the back after hard, never lax. So remove it, and then “stubborn” bearing can be removed intact. A method is also applicable to all of the built-in bearing removal, such as the generator bearings, wheel bearings can be. These views are important,if you want to your car more better,you need choose good car diagnostic tool to equipped with your car. Guaranteed DN85065-2D Dental Air Compressor Description: DN Series medical oilless air compressor is the machine electricity integral whole for the new generation to turn the product,supe speed electrical engineering in adoption in host.all close the advanced construction in,dust palliative…etc. in compare with local product, the noise is more lower,it is real to have the construcion tightly packed,the phycical volume is small, the weight is light,hull drapery can the extensive usage experiment in the medical treatment,hygiene,science,daily life etc. The main features of Air Compressor as blows: 1) Oil free design, clean air power supplier, suitable for your special need and requirement.such as food industry,dentistry,painting. 2) Fashion, portable design,and safety. 3) Silent design with very low noise below 60dB,friendly to environment. 4) Super quality motor with special design ensure 4,000 days long life (data from lab test); 5) Motor is with over-heat protection device,it ensure reliable operation; 6) Maintenance-free and permanent lubrication system; 7) Powerful air flow for high air consumption air tools; 8) Low vibration 9) One compressor for 4 beds 10)Product improvement 1) Tank inner treatment We are committed to providing high quality compressed air equipment, creating high air quality is what we have been working for; rust inside the tank is one of main reason leading to a low quality gas, after years of efforts, we got the technique on it,below is the tank treated by the advance technology of DN Series dental air compressor comparing others. Functions of Dental Air Compressor: Recovery Vacuum Recharging Refrigerant purifying Recycling Discharging used Oil Refilling new oil Auto mode Print Heating(increase recharging rate) High-pressure alarm Full tank alarm Empty tank alarm Air condition system database Purge non-condensable gas BEFORE ORDER(very important!!): Please inform us the Voltage/Frequency you need when ordering!!!! This is electric products,the different country may have different power system(voltage and frequency),so it is very important to let us know the power system you need,we here attach the main power system which our system will be set as default volt/frequency if you have no inform us when order,please check it for your information, 220V/50HZ: Argentina,Chile,Bolivia,Brazil,Colombia,Egypt,HK,Hungary,Indonesia,Iran,Iraq,Morocco,Poland,Romania,Russia,Tailand,Turkey,Vietnam. 230V/50HZ: Austria,Belgium,Denmark,Dominica,Finland,France,Germany,Greece,Iceland,Iceland,India,Ireland,Israel,Italy,Libya,Luxembourg,Mauritius, Netherlands,NewZealand,Norway,Singapore,Spain,Sweden,Switzerland. Our normal power system is 220V/50HZ,230V/50HZ,we will more stock for them,the other power system,maybe we have no in stock,so the shipping time will be longer. Dental Air Compressor Related Diagnostic Tools: -mini air compressor -KWB-402 -TWC-502 -TWC-401

Cotton silk and butter is one of the most common things in the garage. In the repair, many people put the silk cotton is only used to wipe your hands, put the butter just used to lubricate. If the cotton silk and butter combine to remove the transmission main shaft bearing, they can “each improves by association with the other”, come in handy.

The operation is very simple: within a large lump of butter into the bearing, the butter cotton plug into the bearing inner sleeve, until the plug is not into the cotton silk. Then use an iron bar to cotton silk with a hammer hit the bars along the axial direction. When the cotton silk smashing down, to the bearing inner plug of cotton yarn, so repeatedly, the bearings will be squeezed out. This method is suitable for any vehicle with a guide bearing.

Cotton silk and butter by “squeeze,” beat “will unite in a concerted effort”, the force applied to the bearing. Grease into the bearing end, extrusion bearing. Cotton yarn in the back after hard, never lax. So remove it, and then “stubborn” bearing can be removed intact. A method is also applicable to all of the built-in bearing removal, such as the generator bearings, wheel bearings can be.

These views are important,if you want to your car more better,you need choose good car diagnostic tool to equipped with your car.

Guaranteed DN85065-2D Dental Air Compressor Description:
DN Series medical oilless air compressor is the machine electricity integral whole for the new generation to turn the product,supe speed electrical engineering in adoption in host.all close the advanced construction in,dust palliative…etc. in compare with local product, the noise is more lower,it is real to have the construcion tightly packed,the phycical volume is small, the weight is light,hull drapery can the extensive usage experiment in the medical treatment,hygiene,science,daily life etc.

The main features of Air Compressor as blows:
1) Oil free design, clean air power supplier, suitable for your special need and requirement.such as food industry,dentistry,painting.
2) Fashion, portable design,and safety.
3) Silent design with very low noise below 60dB,friendly to environment.
4) Super quality motor with special design ensure 4,000 days long life (data from lab test);
5) Motor is with over-heat protection device,it ensure reliable operation;
6) Maintenance-free and permanent lubrication system;
7) Powerful air flow for high air consumption air tools;
8) Low vibration
9) One compressor for 4 beds
10)Product improvement
1) Tank inner treatment
We are committed to providing high quality compressed air equipment, creating high air quality is what we have been working for; rust inside the tank is one of main reason leading to a low quality gas, after years of efforts, we got the technique on it,below is the tank treated by the advance technology of DN Series dental air compressor comparing others.

Functions of Dental Air Compressor:
Recovery
Vacuum
Recharging
Refrigerant purifying
Recycling
Discharging used Oil
Refilling new oil
Auto mode
Print
Heating(increase recharging rate)
High-pressure alarm
Full tank alarm
Empty tank alarm
Air condition system database
Purge non-condensable gas

BEFORE ORDER(very important!!):
Please inform us the Voltage/Frequency you need when ordering!!!!
This is electric products,the different country may have different power system(voltage and frequency),so it is very important to let us know the power system you need,we here attach the main power system which our system will be set as default volt/frequency if you have no inform us when order,please check it for your information,
220V/50HZ:
Argentina,Chile,Bolivia,Brazil,Colombia,Egypt,HK,Hungary,Indonesia,Iran,Iraq,Morocco,Poland,Romania,Russia,Tailand,Turkey,Vietnam.
230V/50HZ:
Austria,Belgium,Denmark,Dominica,Finland,France,Germany,Greece,Iceland,Iceland,India,Ireland,Israel,Italy,Libya,Luxembourg,Mauritius,
Netherlands,NewZealand,Norway,Singapore,Spain,Sweden,Switzerland. Our normal power system is 220V/50HZ,230V/50HZ,we will more stock for them,the other power system,maybe we have no in stock,so the shipping time will be longer.

Dental Air Compressor Related Diagnostic Tools:
-mini air compressor
-KWB-402
-TWC-502
-TWC-401

How to identify the HID xenon lamp’s quality?

First, start time, HID lamp can be in one second in the light flux of 25%, 4 seconds can achieve the stable flux of 80%, will be lower than the standard choice;

Second, look at the hot start time, out of 15 seconds in the stable lamp operation, some booster power lighting can achieve the highest brightness in 80% seconds, almost insensitive to delay, and some booster is needed 3-5 seconds delay can make the lighting to achieve the highest brightness of 80%. Of course, the booster better quality and less delay, when the booster and the light bulb in the normal working state, you do repeated switch action, good quality booster general working properly, there will be some booster lighting is not normal, lighting will be a bright one does not light phenomenon, must cut off the power and then reopen, consumers should pay attention to this point at the time of purchase;

Third, booster works: the booster work is divided into two kinds, respectively is the constant current and constant power, while the latter is the correct design can provide long life HID.Four, now on the market there is a booster is generally divided into two; two type and a type, and a mounting more convenient.

Good maintenance play an important role in car,but car diagnostic tool are necessary.

X631 Description:
X631 Fast, simple, profitable, the 8-CCD sensor Wheel Aligner from Launch, wireless data transfer with bluetooth technology or 433 MHz radio module.

Advantages of X631
* Infrared 8-beam and 16-sensor loop measurement, accurate and stable.
* Newly developed CCD signal processing technology, nearly uninfluenced by the strong sunlight.
* Complete system upgrading function.
* Unique voice prompt function and visualized animation, very easy to understand.
* Trustworthy operating system to give more convenient and safe operations.
* Keyboard quick switch operation.
* Both special version and common version are provided for user to select.
* Both normal version and demonstration version are provided to make user’s training more convenient and quick.
* Large capacity (4000mAh) Lithium battery with low power consumption and dormancy mode of design.
* Camber, toe-in, battery electricity quantity, charging status and electronic level, etc. can be real-time displayed by LCD.
* In-block type of casting Aluminum alloy probe rods can strongly guarantee the stability and the test precision of the product.

Functions:
* Complete test: The X-631 Wheel Aligner can be used to measure the most wheel alignment parameters, such as front wheel toe-in, front wheel camber, caster, Kingpin inclination, rear wheel toe-in, rear wheel camber, thrust angle, wheelbase difference, tread difference, axle offset, front wheel setback and rear wheel setback, etc.
* Complete databank: wheel alignment data of over 10,000 vehicle models is stored in the system. User can also add new data to the databank.
* Kingpin and camber adjustment real time display function.
* HELP information for vehicle adjustment.
* Language operating prompt function.
* Emergency power supply and in-time charging function.
* The probe rods provide LCD display function.
* Electronic level function.
* Black box self-diagnosis function.
* Front and rear probe rods interchangeable.
* Special test for Mercedes-Benz and BMW vehicles.

LAUNCH Wheel Aligner X631 Specification:
Item Range
Front total toe-in 40
Front toe-in 20
Front camber 8.0
Caster20
Kingpin inclination 20
Rear total toe-in 40
Rear toe-in 20
Rear camber 8.0
Thrust angle 5.0

The driver should give the car interior disinfection frequently

Daily to prevent the car bacteria breeding the best way is to choose air conditioning products, or for the car to do a photocatalyst sterilizing and in the car put air purifier. The expert reminds, according to the air pollution in Shanghai,car sterilization antivirus best done once a quarter Particularly in the automotive air conditioning sterilization work is a must for every quarter maintenance content.

For the sterilization cleaning car everyday, can let a little air purifier. The air purifier market with the electrostatic sterilization, activated carbon for removing formaldehyde and other functions, at the same time, the market there are special small photocatalyst sterilizing device, can rely on solar power, sterilize the car.

Good hand hygiene at all times, is to ensure a healthy first step. Driving time, may differ because of passengers in the car, bring different bacteria. The hand is our contact with the outside world the most important parts of keeping hands clean and sanitary, is equivalent to the first building on the protection of the health of the “defensive wall.”

Reminded,in bacteria is easy to grow season, if the owners every day to stay in the car for a long time, the car more staff, disinfection frequency can be higher. The ozone disinfection for example, suggestions can be disinfected 1 – 2 times a month, two or three months and disinfection in general can be a time.

Cars make our life more and more convenient, but bring some trouble at the same time.However,we will solve it,if we use airbag reset tool properly.

Launch CNC 602A Injector Cleaner Description:
Launch CNC 602A Auto Fuel Injector Tester and Cleaner(launch cnc 602a,cnc 602a)
CNC-602A is an advanced electromechanical product, which can clean and test injectors by simulating engine working conditions. It can also perform cleaning on the injectors and fuel supply system on vehicle.

Launch CNC 602A Injector Cleaner Specification:
Power supply: AC220V10%, 50/60Hz(110V-220V only need a voltage converter, we can provide the transformer.).
Input power: 250W;
Ultrasonic cleaner power: 100W;
Simulated RPM range: 109990rpm; step: 10rpm;
Time range: 19999s;
Pulse width: 0.525ms; step 0.1 ms;
Fuel tank capacity: 4700ml;
Dimensions: 385mm410mm500mm;

Launch CNC 602A Injector Cleaner Functions:
- Ultrasonic cleaning: To perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector completely.
- Uniformity/Sprayability test: To test the uniformity of injecting amount of each injector, and to monitor the spraying status of each injector with the help of backlight. This test is also for reverse flush.
- Leakage test: To test the sealing and dribbling conditions of injectors under system pressure.
- Injecting flow test: To check the injecting amount of the injector in 15 seconds of constant injection.
- Auto. test: To test injectors by simulating different working conditions.
- On-vehicle cleaning: The unit is equipped with various adaptors and couplers that facilitate cleaning on the injectors on vehicle.

Launch CNC 602A Injector Cleaner Spare Parts:
- 105020217 CNC pulse signal connection cable 1,T=0.5
- 105020218 CNC pulse signal connection cable 2,T=0.8
- 103260037 Ultrasonic cleaner assembly 100W
- 106030038 On-vehicle adaptor package(tool kits)
- 107010428 CNC-602A user manual(En&Ch)
- 103250013 Top-supply connector 1
- 103250015 Swiss thread adaptor for fuel top-supply injector
- 103250016 Coarse thread adaptor for fuel top-supply injector
- 103250018 CNC-601/801 Hexangular stopper
- 104990012 CNC-801 BUICK injector adaptor
- 199010019 Injector testing liquid
- 307030024 Injecter detergent