Analysis the rational purchase of the license plate frame

Remove rust material products. Try to choose the aluminum products, aluminum alloy material that is far easier than stainless steel to judge, for example see section and OK weight can be distinguished, of course, the price will not be too cheap. And so to say, if the use of cheap stamping steel sheet and after plating products, new time is really difficult to distinguish, the low cost of products low prices, but is often the most easy to rust, some 4S gift customized products is this.

Whether the license plate frame the network or the Auto Parts City buy, most are some text, pattern and other contents in the above printing. As for the young fashion owners, a license plate frame is personalized, if the 4S store a license plate frame, it is their shop in 99.99% ad. Feel shy, but judging from the law angle, the license plate frame are illegal, license plate frame no marks, letters and decorative pattern.

Prohibited the purchase detachable vehicle license plate frame with lock. In addition to interlocking detachable plate, more of a remote automatic covering or flop products, this kind of product is more has been authorities banned, if be investigated and dealt with may be subject to heavy fines, penalties and buckle car such as the severe punishment.

If this maintenance information can make your car healthy,so following VAG Diagnostic Tool can make your car more better.

GS400 Code Reader Description:
GS400 can read the generic and manufacturer specific DTC’s (Diagnostic Trouble Codes) stored in your vehicle’s EMS (Engine Management System). The EMS reports a fault by illuminating the ECL (Engine Check Light) on the dashboard. This is usually as a result of an electronic sensor failure. In a few seconds, identify the problem directly from the unit display. Once the fault has been repaired the DTC’s can then be erased from the EMS using the device. This will in turn reset the ECL.

GS400 Code Reader Advantages:
GS400 code readers that support Controller Area Network(CAN) protocol has arrived. The newmodel GS400 CAN OBD2 supports all OBD2 protocols, including the newly released Controller Area Network(CAN) protocol, allowing users to keep up with the latest development in scanning.

GS400 Code Reader Functions:
- Reads generic and manufacturer specific diagnostic trouble codes
- Erases diagnostic trouble codes
- Resets the engine check light
- Detects OBDII freeze frame information
- Retrieves the VIN (Vehicle Identification Number) on vehicles from 2002 that support Mode 9.
- Has a wider vehicle coverage as supports the new CAN-Bus standard
- Code definitions displayed on unit screen C no need to look them up!
- Memory/battery backup for off-vehicle data review and analysis
- Unit upgradeable via flash programming using supplied PC serial cable
- No batteries required for operation C power is supplied by the vehicle over the cable
- Easy to use with friendly menu interface
- Hot Keys for quick reading & erasing of codes
- Detachable and replaceable 16-pin OBDII cable
- Brand new from the factory

GS400 Code Reader Packing list:
- GS400 Code Reader
- Obd2 Cable
- Soft Nylon Carry Case

Cleaning leather seats by yourself

As everyone knows leather seats to good care than velvet seat, the main reason is that the leather seats not easily contaminated dirt, if dirty cloth scrub can be simple. However we want to tell everybody is, leather seats is to regular cleaning and care, no cleaning process we imagine that simple. Is a cycle and skill on the inside, if long-term is not clear or improper care, will easily cause irreparable damage to the leather seats.

After cleaning the skin surface of the seat, we have next to the plastic decorative plate cleaning, general leather seats and trim are the same color, the two colors will make people feel very uncoordinated gap. So after washing the skin surface to be cleaned on the seat trim, then brush can play a role in. As the first step, using the cleaning agent sprayed on the surface of the trim panel, resting after a few minutes, then brush scrub, finally with the slightly wet nanometer towel wipe it.

In addition to the seat, the car and some parts are made of leather material coated, in cleaning the seat can also be cleaning method and cleaning, the seat is the same, but it is important to note that these sites are basically nearby electronic equipment, such as a window control and near the car door lock handrail, special protection in the clean up here, spraying cleaning agent by hand from electron equipment, to prevent water from short circuit.

Master some common sense about car is important,but you need to know how to choose VAG Diagnostic Tool.

USB KKL VAG-COM For 409.1 Description:
The USB KKL VAG-COM For 409.1 diagnostic cable is usable for ISO9141 and KWP2000 transmission protocol like used for example by:
Volkswagen/Skoda/Audi/Seat

USB KKL VAG-COM For 409.1 Specification :
- This cable can not work if your car uses a protocol/ bussystem like VPW,PWM or Can-bus.
- Terminal Bus of communication
- Terminal L=Ignition for waking up car computing system (ECU: Engine Control Unit)
- Existed 3 different protocols with same OBD2 connector incl. ISO/KWP, VPW, PMW
- This K/L Diaqnostic interface & cables work on ISO/KWP (Kev Word Protocol) Iaunched after 1996 only
- Supported also ISO9141 protocol
- The cables may work with some versions of the Carsoft, but carsoft used a lot of different interfaces during the different versions and also had some custom interfaces.
- Product running as virtual comport, like many products it use a USB to Rs232 converter chip .But under special circumstances this can give some problems regarding time especially on the handshake lines.

USB KKL VAG-COM For 409.1 Functions:
Read & erase error code,log data e. g. speed, gasoline, consume engine-rotating (RPM: Rotation Per Minutes).

USB KKL VAG-COM For 409.1 Packing List:
1 x VAG COM 409.1 Cable
1 x Driver CD

After encountering a “vehicle” dangerous goods accident how to avoid the two accident?

If the traffic accident, so the first thing you need to do is to evacuate to safe areas, because you don’t know what is the transport of dangerous goods in the car, stay at the scene 1 more dangerous, more so in the first time to evacuate the scene after the accident the best evacuation, then call the police wait for rescue.

Because if the accident led to break it, so please leave the vehicle evacuated, evacuated to safer areas. Don’t think that safety in the car, if the dangerous goods transport vehicle accident of some toxic chemicals leakage, so your car is a gas chamber, so don’t think the car is a closed environment can ensure safety.

In the evacuation time to evacuate to the tuyere, it can guarantee the maximization of your safety. At the same time, the evacuation time use wet towel to cover your mouth and nose with better and safer. If the leak car transport of dangerous goods you feel things probably is going to explode, so please immediately down her head or squat down on her head, to ensure their own safety. In the evacuation time don’t care about property, many owners have fled back to evacuate with vehicle on the property, this is the most undesirable.

These views are important,if you want to your car more better,you need choose good VAG Diagnostic Tool to equipped with your car.

COM KKL VAG-COM For 409.1 Description:
This COM KKL VAG-COM For 409.1 diagnostic cable is usable for ISO9141 and KWP2000 transmission protocol like used for example by:
Volkswagen/Skoda/Audi/Seat

COM KKL VAG-COM For 409.1 Advantages:
- This VAG COM 409.1 cable can not work if your car uses a protocol/ bussystem like VPW,PWM or Can-bus.
- Terminal Bus of communication
- Terminal L=Ignition for waking up car computing system (ECU: Engine Control Unit)
- Existed 3 different protocols with same OBD2 connector incl. ISO/KWP, VPW, PMW
- This K/L Diaqnostic interface & cables work on ISO/KWP (Kev Word Protocol) Iaunched after 1996 only
- Supported also ISO9141 protocol
- The cables may work with some versions of the Carsoft, but carsoft used a lot of different interfaces during the different versions and also had some custom interfaces.
- Product running as virtual comport, like many products it use a USB to Rs232 converter chip .But under special circumstances this can give some problems regarding time especially on the handshake lines.

COM KKL VAG-COM For 409.1 Functions:
Read & erase error code,log data e. g. speed, gasoline, consume engine-rotating (RPM: Rotation Per Minutes).

COM KKL VAG-COM For 409.1 Packing List:
1 x VAG COM 409.1 Cable
1 x Driver CD

A driver’s license approval

In the driving license examination, regulation of large and medium-sized van drivers to participate in the annual inspection, can be exempted from inspection but did not score. At the same time, hold other drives the driver license and the occurrence of fatal traffic accidents take equal responsibility for the above, to participate in the examination.

In order to further increase the traffic illegal cost, shall be recorded over 12 hours for 3 consecutive years of record or not tested on the incidence of fatal traffic accidents take over the responsibility of the same, the cancellation of the highest, quasi driving type driving, gradually reduce the driving qualification, finally only retains its small car driving license.

Clearly pointed out in the examination regulations, holders of large passenger cars, tractors, city buses and medium-sized passenger cars, large trucks driving license of the driver (not including the small car), should be in each score period (one year) to the public security organ of the traffic management departments to accept examination within thirty days after the end of. But in one scoring cycle without scoring record, shall be exempted from the scoring cycle testing.

Cars make our life more and more convenient, but bring some trouble at the same time.However,we will solve it,if we use OBD Tuning properly.

KWP2000 ECU PLUS Flasher Description:
Connects to USB
Supports high speed ECU flashing
Led Indications for USB-power/CAR-power/rx/tx
Can read and write a lot more ECU’s than the normal KWP2000 Software

KWP2000 ECU PLUS Flasher Functions:
- Read and analys your current ECU software.
- Upgrad the ECU software with a re-mapped file.
- Repair ECUs with software problems or corruption.

KWP2000 ECU PLUS Flasher Workable Model:
For supported ECU’s and the function on them pls. download the pdf file for more details !

Package Contains:
KWP2000 Plus device
USB A/B connection cable
OBD2 connection cable
38 pin Mercedes connection cable
20 pin BMW connection cable
female banana cable

How do you use the KWP2000 PLUS?
1.You need a computer. Installing KWP2000 Plus software.
2.Connect USB cable to your PC;
3.Connect to your car via standard 16-pin OBD2 connector;
4.Supports high speed ECU flashing
5.Led indications for USB-power Car-power/rx/tx
6.Support KWP2000+ software and other KWP/ ISO software

How to Read and Write data?
Read and Write
1.Click read button to read out the original data
2.Click write button and select the file you want to write
3.Save the file to you HD, edit or forward it -Follow the instructions on screen
4.switch off ignition and wait 10 seconds

KWP2000 ECU PLUS Flasher Packing List:
6 pc x Connect cables
1 pc x KWP2000+ Main unit
1 pc x Driver CD

When using the jack must be supported on the chassis of the support point

When using the jack to attention must be supported on the chassis for supporting point, support by family cars often on the inside of the side skirts, two fin like both sides of the chassis, in front of the back 20 cm, 20 cm in front of the rear wheel. The fins are protruding from the chassis plate, can withstand the pressure of relatively large. If you do not follow the correct mode of operation, the jack on the chassis plate, is likely to cause unnecessary damage to the chassis, and supported on the lower arm suspension is not correct operation, if Jack slipping vehicles fell, chassis and Jack will harm.

Many domestic car jack rocker is a split structure, rotating and supporting the wrench and sleeve links, so in the process of lifting jacks, force should be uniform, not too fast or too hard, More haste, less speed., if in the lifting process, Jack touch askew cause damage, even two secondary support have not had the opportunity, malt!

Finally to remind, is the use of such as car jack is only support routine replacement of tires or check suspension, cannot replace the lifting machine is greatly repair work, no body or arm reach under the body, The loss outweighs the gain. danger. Another experience to recommend to you, in the jack lifting, can remove spare wheel or tire into under the body, a temporary insurance, even if Jack problems will not cause a greater loss.

If this maintenance information can make your car healthy,so following OBD Tuning can make your car more better.

Honda Diagnostic System Kit (hds) Description:
Honda Diagnostic System kit (HDS) is OEM diagnostic tool for using in the Honda and Acura workshop.It is a professional diagnostic tool for Honda and Acura. It is the original diagnostic tool. Easy to do diagnosis.We guarantee the quality and provide good after sale service.

Honda Diagnostic System Kit Function:
supported by Honda/Acura protocols:
Reading and decoding fault codes from control blocks memory;
Deleting fault codes;
Displays system current parameters in digital form;
Displays system current parameters in graphical form;
Combined displaying of data;
Management of executive devices;
Logs keeping – writing and keeping of digital parameters in memory;
Special functions – changing of permissible settings of blocks, programming etc.
Functions supported by OBD-II protocols:
Mode $01 – Displays system current parameters in digital form (up to 8 parameters at once);
Mode $02 – Displays parameters of reeze frame;
Mode $03 – Reading and decoding of fault codes from control block memory;
Mode $04 – Deleting of fault codes (memory clearing);
Mode $05 – Displays results of oxygen sensors;
Mode $06 – Displays results of changeably controled systems and components;
Mode $07 – Displays results of constantly controled systems and components;
Mode $08 – Management of executive devices;
Mode $09 – Displays car identification info.
Hardware and software requirements:
PC or laptop with either Windows 2000 Professional (SP4 or later) or XP (SP1 or later). Hard disk drive with at least 400MB of free space
CD-ROM drive (if a high-speed Internet connection is not available)
RS232 port required to connect PC to HIM (PC version software only)
Monitor capable of displaying in VGA mode or above (1024 x 768 recommended)
Internet connection (high-speed connection recommended)

Honda Diagnostic System Kit Package Include:
- HIM with OBD II Cable-1 pc
- DVD-1 pc
- 3 Pin Cable-1pc
- RS232 Cable-1pc
- Storage Case-1pc

The use of Jack

The correct mode of operation is: 1, manual transmission models to pull the handbrake, the gearbox hang into the 1 gear or reverse gear (don’t forget to start); 2, automatic transmission models is to pull the handbrake, and transmission up to P block position. 3, the lifting operation of the jack in the car.

Because Jack family cars is often a separate branch of a wheel, so if it is parked on the slope of the ground, change the relative position of Jack rises and body may have a point of view, in the angle of the slope is larger on this point will have a greater change, easy to slip or damage. If the fault happens in the slope, suggest the use of brick or wood tools such as click wheel to prevent them from sliding.

Jack must be used on a hard flat surface, if it is relatively soft ground, such as dirt or sand road, in the use of Jack is recommended before the planks or flagstone mats in the jack under the operation, decrease the pressure, to prevent jack into the loose soft ground.

Good maintenance play an important role in car,but OBD Tuning are necessary.

Honda GNA600 Description:
GNA600 interface module kit works with the OEM-Honda Diagnostic PC Software (HDS). This is the replacement for the previous dealer tool Honda HIM. It can diagnose all Honda and Acura vehicle systems on models from 1992 to present year.

Honda GNA600 Function:
Honda GNA600 comes with the latest software to access immobilizer, reprogram key and install new or used PCM’s functions. Full access to all systems using the only guaranteed accurate data available. This kit will also give you access to the latest reflash software for PCM updates. This software also includes a scan tool with OBD2 access to all other cars 1996 on.
GNA600 supports for Honda FCX Clarity hydrogen fuel vehicles
GNA600 use USB 2.0 communication
GNA600 can change the VIN code of CANBUS cars.
GNA600 can program the smart key without the programming password
GNA600 supports all Acura
GNA600 cancel all passwords
GNA600 supports odometer rewrite via OBD-16 (Condition: the vehicle with Body-Electric)
Currently GNA600 doesn’t support ECU tuning.

Honda GNA600 Language:
1. Spanish 2. Slovenia 3. English 4. Greece 5. German 6. Danmark 7. Czechic 8. Chinese(Taiwan) 9. Chinese(China) 10. AmerEnglish 11. Vietnam 12. Turkey 13. Thailand 14. Swedish 15. Russian 16. Portuguese 17. Portuguese(Brazil) 18. Poland 19. Norwegian 20. Holand 21. Korea 22. Japanese 23. Italy 24. Indian 25. Hungary 26. French 27. French(Canada) 28. Finland 29. Spanish(Mexico) 30. Russian

Honda GNA600 Package List:
-GNA600 Main Unit
-USB/internet link cable
-16 pin OBD2 Cable
-3pin to 16pin cable
- USB external Cable
-DVD

You should attention the fuse when you buy the car

When you purchase a new car and found the odometer speedometer does not work should pay attention to, because it is likely to be profiteers put down your vehicle management fuse ABS pump, so the vehicle can normal open but mileage does not increase, and this is also a lot of profiteers renovation drive car when the common means of the new car to sell the.

For this kind of practice you should be very careful, because the fuse unplug the ABS pump, ABS system doesn’t work, so in some very dangerous conditions driving is very dangerous, severe cases may have life danger. Therefore, in the purchase of the dashboard warning light ABS pump and dashboard instruments not the normal work of the “new” it would have to be careful.

General in the winter when the owner may ignore the replacement of antifreeze function of glass of water, therefore, especially in the morning when the glass of water spray, spray water would have been found not by spraying glass water pump switch, fuse for a long time control of glass water spray would overheat broken, serious when still can burn the water pump. When this switch is not the water, you don’t have to worry to switch the water, check the glass of water Is it right? Frozen, or have a look whether blocked nozzle.

Everyone has a heart, if the heart stops beating and the life will disappear.Cars are no exception,Launch X431 is the heart of the car,therefore, quality is good and bad, directly affects the car’s performance and service life.

Launch DBSCAR Description:
Launch DBSCAR is a high-tech automotive fault diagnostic terminal to work with Android smart phones. By connecting it via Bluetooth to smart phones, it can perform basic diagnosis on vehicle OBD system, and it can also realize basic diagnostic functions of entire vehicle system including reading DTCs, clearing DTCs and reading data stream. Combined with many advantages of the smart phones, more application services about vehicle data can be achieved.

Launch DBSCAR Introduction:
Launch DBSCAR is a high-tech automotive fault diagnostic terminal to work with Android smart phones. By connecting it via Bluetooth to smart phones, it can perform basic diagnosis on vehicle OBD system, and it can also realize basic diagnostic functions of entire vehicle system including reading DTCs, clearing DTCs and reading data stream.

Launch DBSCAR Features:
1. Read DTCs of vehicle entire system
2. Clear vehicle DTCs
3. Read data stream of vehicle entire system
4. Real-time diagnosis via Bluetooth of cell phones
5. Data instrument, fuel consumption analysis
6. Launch clouds accounting

How to get software:
1. Customer in their own IPAD or IPHONE or use a computer to register CC number, CC number can be easily registered, registration site is www.dbscar.com, registered well after the system will send a message to customers, there are users name and password.
2. Open the downloaded client signs x431 idiag car cloud applications (according to the customer’s IP, English system, mobile phone and IPAD download is English, if the client is downloading Chinese, so that customers put their operating system to change IPHONE or IPAD English-speaking, when purchasing software must use currency USD) with a CC number and password to log in. after that, select car cloud diagnostic card registration, fill in here your serial number, enter the password in the password to complete the paper registered .
3. Once registration is completed, the “get software” inside the payment to buy the software.

Launch DBSCAR Specifications:
1. Connection:standard OBD2 interface; Micro USB 2.0
2. Typical power consumption:(12V), quiescent current as 25mA, average working current for the whole unit as 45mA;
3. Working temperature:-20~5
4. Storage temperature:-30~70
5. Dimension:L*W*H=48mm*24mm*32mm
6. Weight:26g
7. Working voltage:vehicle battery DC input 9V-15V

Automotive fuse’s daily maintenance

Because the car is on the box, under normal circumstances do not deliberately maintenance, but need to pay attention to is the protection of insurance cover, the fuse is lost, don’t let the fuse is exposed outside, so as to avoid the fuse circuit. In addition to cover the fuse, also can not use other materials to replace, because the insurance box is made of full consideration of the insulation and high temperature resistant, free to use other material covering the fuse will have the danger of fire.

How to do it yourself replacing the fuse? Side fuse box cab is generally located in the control station near the door or on the wheel below; launch insurance box inside the cabin in a vehicle engine compartment edge. According to fuse fuse box lid comparison table we can find the position we are looking for. Have to find the fuse the specific location, where we can control the legend find the fuse in the car.

The remaining steps is the use of cars equipped with special tool pull out the damaged fuse, fuse can be put on standby. At present, the vehicle using the insert fuse no positive and negative points, so as long as you pay attention to when replacing the fuse fuse size and amperes can.

Cars make our life more and more convenient, but people think automobile beauty and maintenance are very trouble. Actually otherwise, as long as you use the right way and use appropriate Launch X431,not only can save your time, and at the same time also can make your car more beautiful.

Launch Cresetter Description:
Launch CResetter oil lamp reset tool has been released!

CResetter is a specialized automotive diagnostic tool for resetting the automotive service lights, which is developed on the 6th generation CReader hardware platform. This product has applied the latest Cortex-M3 32- bit processor, 2.8″ color LCD display, which is smart, portable, and simple to use. After repaired and serviced the vehicle, the maintenance man can use it to clear or reset the warning lights on the instrument cluster to eliminate the unnecessary warning, which can make the car owners driven at ease.

Language: Spanish, Chinese, English, French, German, Italian

Launch Cresetter Vehicle Coverage:
USA: GM ,FORD ,CHRYSLER
European: BENZ ,BMW, VW, AUDI, LANDLOVER, VOLVO, SAAB,OPEL, CITROEN, PEUGEOT ,SEAT,SKODA,
Asia: NISSAN,TOYOTA,MITSUBISHI,HONDA

Launch Cresetter Functions:
-Service lamp reset
-Maintenance interval setting ( for some vehicles)

Main function
- Oil lamp Reset Additional function (for special models)
- Airbag ECU Reset
- Brake pads Reset
- Air filter indicator Reset
- Spark plugs Reset
- Maintenance interval set

Launch Cresetter Tech Specs:
a) Screen: 2.8” TFT 262K true color, 320*240 Pixels LCD display
b) Input voltage range: 8 ~ 32V
c) Operating current:<100mA@12V(Typical)
d) Power consumption: <1.2W(Typical)
e) Link connection: Standard OBD 16-pin DLC
f) Operating temperature: 0~ 50
g) Storage temperature: -20~ 70 @ RH 60%
h) Outline dimension: L * W * H = 121 * 82 * 26mm
i) Weight: <500g per set

Launch Cresetter Packing List:
-Cresetter
-User’s manual, 1pcs
-USB cable, 1pcs

Introduction of Auto fuse

The fuse is its official name is called, the real fuse (hereinafter as easy to understand as a fuse), the most basic function of fuse is when the circuit current anomaly and exceeds its rated current fuse to circuit protection function. The fuse has two important working parameters, one is the rated current; one is the rated voltage, use the time to choose to fuse the corresponding according to current and voltage circuit.

In the structure design, insert the general vehicle fuse with fuse, with engineering plastic shell, wrapped in the melt structure made of zinc or copper, the metal melt and pin connections. Insert fuse specifications car usually 2A to 40A, the ampere fuse numerical will be noted in the top. If the fuse burned out let a numerical illegible words, we can also be judged by its color, the international standards: 2A, 3A, 4A grey purple pink, orange yellow, 5A 7.5A, 10A 15A Coffee color red, blue, yellow, 20A 25A, 30A green, colorless and transparent 40A deep orange.

Because many parts and electronic equipment on automobiles, and each device will be equipped with a fuse, so in order to facilitate future repair, every car in the design stage, designers took automotive fuses are concentrated in one place, but this place is called insurance box. Generally a car has two insurance box, one is located in the engine compartment, responsible for automobile external electrical fuse, such as engine control units, horn, glass cleaner, ABS, headlights; another in the left near, management of car electric appliances, such as window lifter, airbags, the electric chair, cigarette lighter.

If this maintenance information can make your car healthy,so following car diagnostic tool can make your car more better.

Launch X431 CREADER IV+ Description:
Launch X431 Creader IV+ is greatly Launch in May, 15th, 2013.X431 Creader IV+ code scanner is a tiny product, can diagnose for cars. It is portable, stable, powerful, cost efficient, and worth to have it by car owners. With powerful function.

Language: English, French, Spanish

Creader IV+ is high cost efficient small diagnosis device, which is designed for Car DIY, small repair factory, Repair shop. It has Keypad with WIN 8 style, multi language. A simple product can provide powerful function, make it outstanding from other similar product.

Creader IV+ Functions:
Applicable for all vehicles meeting OBDII standard after 1996
Reads and displays I/M monitor status
Vehicle Information
Read and Clear DTC
Read Data Stream

Creader IV+ Parameters:
Display: Backlit, 128 x 64 pixels
Input Voltage Range: 9-18 V
Connection: 16- PIN DLC
Operating Temperature: 0 ~ 50
Storage Temperature: -20 ~ 70

Need to go to the shop repair project

Similar to tire of the tire, the cooler weather can cause the belt to accelerated aging, aging serious belt because of toughness, easy to loose, slipping, so to check the belt carefully in the winter before. But checking belt general to carry out with the help of a professional, once found the aging damage, need to develop the habit of regular and relatively frequent habit of checking, serious when shall timely replacement.

The weather turns cool, for vehicle batteries also pose a considerable threat. The battery of some life close to the limit, the summer use may not show the problem, when the cooler temperatures will be accompanied by a vehicle is difficult to start, start the weak can’t even start, it is important for battery check. But the battery life and working condition inspection needs instrument in the professional repair shop, we are unable to detect the.

Antifreeze is an important oil the whole car oil, with increased use of time, there will be other material mixing led to its freezing point will rise of antifreeze, so check in before winter antifreeze is very important. Through the repair shop in the professional cryoscope instruments can detect the antifreeze can continue to use or need to be replaced, comply with professional advice for inspection and replacement, avoid to bring such as car after the winter temperature anomaly.

Master some common sense about car is important,but you need to know how to choose Launch X431.

Launch X431 Diagun Description:
X431 Diagun is a specially designed diagnostic tool for automotive technicians.Compact main unit, powerful diagnostic functions, fast and convenient update,universal connectors, make it the first choice for technicians. X431 Diagun is the standard equipment for technicians.

X-431 Diagun is a newly developed wireless diagnostic computer with full color display screen. It is a product integrated with automotive electronic technology application and information network technology.

“Portable Vehicle Fault Diagnosis Technology” is an advanced vehicle diagnosis technology first created and advocated by Launch and represents the highest level of vehicle diagnosis technology in the world. This is also the development trend and the best solution of this field in the future.

X431 Diagun can test almost all the domestic cars and the imported ones from Asia, Europe and America. Launch X431 Diagun diagnoses two cars at the same time, compares and analyzes the data to find the fault. Its features are high quality test, upgrading fast any where at any time and synchronized with the newest international models. Compared with other products, it has high quality and performance.

Launch X431 DIAGUN Function:
1.Open automobile diagnosis function
2.Email free update function
3.PDA function
4.Multi-language display function
5.Print function

Launch X431 DIAGUN Features:
1.An open diagnostic technology based on LINUX operating system;
2.Get online directly and update conveniently;
3.Information can be shared and brightness can be adjusted;
4.Large LCD touch screen for convenient data input;
5.Interactive and simple operation interface with modern design;
6.With all functions of PDA;
7.Innovative outline.