Peugeot Lexia 3 Citroen with five cables

Peugeot Lexia 3 Citroen with five Cables Description:
Dealer’s diagnostic scanner for comprehensive diagnosis for Citroen and Peugeot cars. You can do all as an authorized Dealer does. This diagnostics software allows you to perform complete diagnostics of all from 1995 till present models. Diagnostics is performed via OBD II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).

  • Retail price: US$142.84       Stock of Products:In Stock
  • Buy Now: US$ 99.99        You save: US$42.85

Peugeot Lexia 3 Citroen Function:
Unlike other universal car scanner tools which only read fault codes, this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).
Read identification
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc…
Read fault codes
Displays all stored and pending fault codes with complete description (e.g. “Rail pressure – too low pressure”).
Program supports report printing or copy to clipboard.
Clear fault codes
This function clears all stored fault codes and other diagnostic information.
Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.
Actuator test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc
Programming functions/Adaptation
This feature is of great importance in all vehicles because systems like Engine control units, Immobilizers, Airbags, Alarms, Body Control Units, and some others, require you to perform reset or programming procedures after car repair is done, or even configuration after replacing broken Control Unit.
Hardware and software requirements
Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP with the latest service pack installed.
If customer requires, we can prepare ready to work PC.

Peugeot Lexia 3 Citroen Languages:
PPO Software supported language:
English, Chinese, German, French, Japanese, Russian, Arabia, Spanish, Turkish, Danish, Iranian, Greek, Israel, Hungary, Indonesian, Italian, Dutch, Norwegian, Polish, Portuguese, Finnish, Slovenian, Swedish, Czech, Croatia, Thai.
Lexia Software supported language:
English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech.

Peugeot Lexia 3 Citroen Package Includes:
Main unit (1 pc)
Diagnostic cable (2 pcs)
USB cable(1 pcs)
Power cable clips( 1 pair)
Latest version Software CDs( Lexia & PPO) (1 pcs)

by   Khan, September 17, 2013
hi, if this tool can programming keys ?
Reply:
Dear Sir,
Yes,it can program keys,but we do not provide car pin code and techinical about how to program keys,please understand. Thank you and best regards!
Service team

by   MONTESINOS, September 5, 2013
Hi, can PP2000 diagnose or deal with my peugeot 407 HDi 1.6 diesel engine model 2008?
Reply:
Hi,dear friend
Yes,it can diagnose peugeot 407 in 2008 year.
thank you and best regards!

Diagnostic Connector item is the best choice for you

 SI-Reset Opel OBD2 Description:
- Plug the Device into the SI-Reset Opel OBD2 socket of the car
- All LED`s will blink and than stay on
- Turn ignition key to enable the board electronic but don`t turn on the motor
- Press the button for the operation you want to perform shortly
- The LED of the choosen operation will light and the other Led`s will be off
- LED`s will perform a light chain which means reset is done

SI-Reset Opel OBD2 Functions:
- Reset Inspection Intervall
- 15.000 km or 1 year
- 15.000 km or 2 years
- 30.000 km or 2 years (LONGLIFE)
Diagnostic Connector - SI-Reset Opel OBD2
Porsche Piwis Cable Description:
Our Porsche PIWIS cable communicates with your car just like the factory tool does, and can access all of the systems in the car. OBD2 was created for emissions related problems and only covers a limited subset of your car engine.

Porsche Piwis Cable Functions:
Reset service reminders Reads diagnostic trouble codes Displays actual values Shows ECU information Clears diagnostic trouble codes Turns off check engine light Turns off airbag light It work on following systems DME Airbag ABS Tiptronic Alarm Seat Memory Heating & A/C And more…

Renault Can Clip Interface Description:
Renault CAN Clip Diagnostic Interface is designed to diagnose Renault cars models including automatically test all Renault models’ computers,reporgramming,airbag test and other functions.The newest version is V133, and it supports multiple languages.

Renault Can Clip Interface Function:
- See all the information relating to the vehicle
- computer test
- automatic test of all computers
- reprogramming
- airbag test
- scantool (OBD tests)
- Base Doc (access to Technical Notes)
- physical measurements
- antipollution
- multimeter

Can not use water wash the engine compartment directly

Many owners of a friend like using water washing the engine compartment in a car wash, because it seems to be able to quickly clean out of the engine compartment, but also effective for engine cooling. In fact, this is completely mistaken, as has been noted, rinse with cold water temperature of the object, the difference is huge, to the car’s metal structure, especially the internal structure of mechanical damage, or even cracking. So I want to use this way to the engine cooling is not the practice of science.

In addition, to convenient flush water directly the engine compartment that is not desirable. The engine of the vehicle is now not only have the engine, there are various kinds of electronic control units, although these electronic control element into the type of water treatment, but carefully, do not use who wash the engine. If you feel the engine cabin is very dirty. Look at uncomfortable words, can use foam cleaning market sales agent to clean the engine compartment, although the time is long, but it will not affect the engine compartment parts.

General braking system in water because of brake temperature to evaporate, so the summer will not affect the brake system, but if you are after just finished the road or frequent use of brakes do not recommend immediately with water and brake disc brake. Because the brake disc thermal very after use, immediately flush will make the brake disc / piece of possibility of bursting. In addition when converted to winter on the situation is not the same, the water is very easy in the brake system in the form of ice, greatly affected the braking performance, so the winter washing after more space in the repeated braking of vehicle, as far as possible eliminate car wash water.

Cars make our life more and more convenient, but people think automobile beauty and maintenance are very trouble. Actually otherwise, as long as you use the right way and use appropriate obd2 connector,not only can save your time, and at the same time also can make your car more beautiful.

Renault Can Clip Interface Description:
Renault CAN Clip Diagnostic Interface is designed to diagnose Renault cars models including automatically test all Renault models’ computers,reporgramming,airbag test and other functions.The newest version is V133, and it supports multiple languages.

Renault Can Clip Interface Function:
- See all the information relating to the vehicle
- computer test
- automatic test of all computers
- reprogramming
- airbag test
- scantool (OBD tests)
- Base Doc (access to Technical Notes)
- physical measurements
- antipollution
- multimeter

Renault Can Clip Interface Q&A:
1. Q: How can I update the Renault software ?
A: Renault can clip update by Software, you can find the download link at Renault Clip Software Download.

2. Q: How to install the renault can clip software?
A: Renault Can clip setup have three main steps:
First step: set your PC language as English.
Second step: install ‘Crack’.
Third step: install “setup.exe”, at this step, you can select the language you want.
More detail check the renault clip installation guide

3. Q: What the requirments of Laptop?
A: 1) ANY PC running windows 2000/xp/VISTA/Windows 7 (32 bit only)
2) Set system language as English (United States)
3) install the software to C: //, and C:// has to be 10GB space free
4) Computer CPU:2.0 GHZ
5) Memory: 1GB

4. Q: Which Language dose Renault CAN Clip Interface support?
A: Renault Clip software supports the following languages: English, German, Russian, French, Spanish, Italian, Portuguese, Dutch, Danish, Finnish, Norway, Swedish, Romania

Renault Can Clip Interface Package include:
- 1 pc Renault CAN Clip Interface main unit
- 1 pc Renault can clip – Car connection
- 1 pc Renault can clip’scable for CAN Clip – PC connection
- 1 pc Reanult can clip’s software CD ( the latest version)

Renault CAN Clip Install Notice

http://www.vtoolshop.com/forum/renault-can-clip-install-notice-t368.html

 

The car body color matters needing attention

In recent years, with the rise of body film color business, body color is more and more attention, but the patch changed color is not allowed, not the technology is not mature, but for security reasons, the film can be easily will tear film, then the traffic accident, for the car search will increase the difficulty, but we also know that, small range of the same color film after application may be allowed.

In recent years, with the rise of body film color business, body color is more and more attention, but the patch changed color is not allowed, not the technology is not mature, but for security reasons, the film can be easily will tear film, more traffic accidents such as, for the car search will increase the difficulty, but we also know that, small range of the same color film after application may be allowed.

Some of the pursuit of individual owners, like sub region for the vehicles to change color, such as the roof and the machine cover comprises a body for use in a variety of colors. What is more imitation police car, fire truck and other special vehicles color even logo, these are not allowed. Some friends before the examination of color application, hope to finish as soon as possible for the examination. Due to the system, change the color of the application in 3 working days to complete data and information for the record, so the color changed to complete the record after at least 3 working days before the normal inspection.

These views are important,if you want to your car more better,you need choose good obd2 connector to equipped with your car.

Peugeot Lexia 3 Citroen With four Cables Description :
LEXIA-3 Interface latest version, works for both Citreon and Peugeot! Dealer diagnostic scanner for comprehensive Citroen and Peugeot cars diagnostic. You can do all as a authorized dealer does.This diagnostics software allows you to perform complete diagnostics of all from 1995 untill present models. Diagnostics is performed via OBD-II connectoror via manufacturer-specific connector. This item 100% works fine. It is tested by tens of users.

Lexia Software supported language :
English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech

Peugeot Lexia 3 Citroen With four Cables Features:
Unlike other universal car scanner tools which only read fault codes, this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).
Read identification
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc… Read fault codes
Displays all stored and pending fault codes with complete description (e.g. “Rail pressure – too low pressure”). Program supports report printing or copy to clipboard. Clear fault codes
This function clears all stored fault codes and other diagnostic information.
Auto-scan (complete car scan/test) Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.
Actuator test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc Programming functions/Adaptation
This feature is of great importance in all vehicles because systems like Engine control units, Immobilizers, Airbags, Alarms, Body Control Units, and some others, require you to perform reset or programming procedures after car repair is done, or even configuration after replacing broken Control Unit.
Hardware and software requirements Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP with the latest service pack installed.
If customer requires, we can prepare ready to work PC.

Automobile insurance and Renault CAN Clip Interface misunderstanding

Renault Can Clip Interface Description:
Renault CAN Clip Diagnostic Interface is designed to diagnose Renault cars models including automatically test all Renault models’ computers,reporgramming,airbag test and other functions.The newest version is V133, and it supports multiple languages.

Q&A:
1. Q: How can I update the Renault software ?
A: Renault can clip update by Software, you can find the download link at Renault Clip Software Download.

2. Q: How to install the renault can clip software?
A: Renault Can clip setup have three main steps:
First step: set your PC language as English.
Second step: install ‘Crack’.
Third step: install “setup.exe”, at this step, you can select the language you want.
More detail check the renault clip installation guide

3. Q: What the requirments of Laptop?
A: 1) ANY PC running windows 2000/xp/VISTA/Windows 7 (32 bit only)
2) Set system language as English (United States)
3) install the software to C: //, and C:// has to be 10GB space free
4) Computer CPU:2.0 GHZ
5) Memory: 1GB

Wading insurance does not have to be purchased separately, prior understanding, no purchase wading insurance vehicle when the engine inlet, is unable to get insurance company claims, but in fact this is not entirely correct. Because some of the provisions of the insurance companies have a clear explanation for this problem, car damage buy insurance is covered wading insurance and risk of spontaneous combustion of additional insurance, if not needed can be individually removed.

Believe that every car friends do not want the vehicle is stolen or destroyed in yourself, never mind, as long as you can meet your claim the insurance conditions, insurance company will complete compensation you deserve it. And here there is a problem, that is the vehicle insurance prices higher future can get the amount insured when the vehicle?

Of course, the answer is negative, if your car insurance, so the vehicle insured amount will be in accordance with the actual vehicle sales price, but if you are a continued insurance, so the vehicle insurance amount will be in accordance with the current sales or second-hand car sales prices for insurance. So you when the insured vehicle insurance amount should be the actual value is determined according to the insurance of vehicle insurance, full insurance at the time of the accident, ensure to get reasonable compensation. Don’t over insurance, because excess insurance and can not be excessive compensation, it is just a waste of money.

Car safety belt use matters needing attention

Seat belt height adjustment is necessary, if too high, emergency tightening to le to the neck, may cause unnecessary harm; if too low, you may not be able to completely restrict the body forward, if slipping off the shoulders is dangerous. Safety belt can not be loose not too tight, probably have two fingers is appropriate to ensure safety will not be too sad.

The children ride, if the direct use of safety belt fixing not only security will have a negative impact, because of their height should be much shorter than adults, so the safety belt passes from their neck, cervical their young emergency will suffer a fatal injury. Here to promote all have children you must give it with a child safety seat, if your child is not suitable for child safety seat, you can increase the child seat after use, the safety belt.

Safety belt rear seats are equally important, while the rear seat belts rarely adjustment, but overall position is still not bad, method and front. Under cost constraints, the central position in the low-end models are generally equipped with belt, it has no three point safety belt so perfect, no shrinkage mechanism, and the hip part can only be fixed people, the upper part of the body is not fixed, but it is better than what is not sitting in the back row is much, after all in case of emergency, it can protect you not to let you fly to the front windshield.

Good maintenance play an important role in car,but obd2 connector are necessary.

SI-Reset Opel OBD2 Description:
- Plug the Device into the SI-Reset Opel OBD2 socket of the car
- All LED`s will blink and than stay on
- Turn ignition key to enable the board electronic but don`t turn on the motor
- Press the button for the operation you want to perform shortly
- The LED of the choosen operation will light and the other Led`s will be off
- LED`s will perform a light chain which means reset is done

SI-Reset Opel OBD2 Functions:
- Reset Inspection Intervall
- 15.000 km or 1 year
- 15.000 km or 2 years
- 30.000 km or 2 years (LONGLIFE)

SI-Reset Opel OBD2 Support Model:
Opel Astra build after 1998, Zafira build after 1998, Corsa build after 2000

SI-Reset Opel OBD2 Packing List:
Service Intervall Reset Unit with diagnostic connector

Car washing device installation

Hand washing device installation is relatively simple, but the automatic car washing device installation should slightly some trouble, first of all to pipeline connected with the water tank, and the pipeline is long, therefore need to spend some time it will be completely shun. In addition to fixed with different nozzle adapter is different. The official before use, car washing manual for the need to rely on continuous inflation increased washing barrel pressure difference between inside and outside, in order to achieve the spraying effect. Compared with automatic washer of preparation work to a lot of effort, as long as the plug in the power switch is turned on.

Manual washer in the play enough gas, water column spray distance of about 4m, because it is relying on advance up to maintain strength, thus inflating a water state can maintain half minutes, then efforts will continue to weaken, again. And the injection form manual washing device is relatively single, want to fog, you need to replace the nozzle.

Washing process, manual washer is laborious, and effect than automatic washer worse. But automatic washer also has one of the biggest drawbacks is the fee, water is too large. To erase the hard soil, rely on the washer rinse is certainly not, or to daub a few car cleaning agent to clean the dirt. Two car washing device can eventually be vehicle washing, but hand washing is more difficult than some, with automatic washer to be longer.

Cars make our life more and more convenient, but people think automobile beauty and maintenance are very trouble. Actually otherwise, as long as you use the right way and use appropriate obd2 connector,not only can save your time, and at the same time also can make your car more beautiful.

Peugeot Lexia 3 Citroen With four Cables Description :
LEXIA-3 Interface latest version, works for both Citreon and Peugeot! Dealer diagnostic scanner for comprehensive Citroen and Peugeot cars diagnostic. You can do all as a authorized dealer does.This diagnostics software allows you to perform complete diagnostics of all from 1995 untill present models. Diagnostics is performed via OBD-II connectoror via manufacturer-specific connector. This item 100% works fine. It is tested by tens of users.

Peugeot Lexia 3 Citroen With four Cables Features
Unlike other universal car scanner tools which only read fault codes, this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).
Read identification
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc… Read fault codes
Displays all stored and pending fault codes with complete description (e.g. “Rail pressure – too low pressure”). Program supports report printing or copy to clipboard. Clear fault codes
This function clears all stored fault codes and other diagnostic information.
Auto-scan (complete car scan/test) Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.
Actuator test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc Programming functions/Adaptation
This feature is of great importance in all vehicles because systems like Engine control units, Immobilizers, Airbags, Alarms, Body Control Units, and some others, require you to perform reset or programming procedures after car repair is done, or even configuration after replacing broken Control Unit.
Hardware and software requirements Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP with the latest service pack installed.
If customer requires, we can prepare ready to work PC.

Peugeot Lexia 3 Citroen Software supported language :
English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech

The filter type air purifier for automobile

This kind of converter type style of the products to more than the rich, diverse modeling can meet the different tastes, also can choose different power sources: solar power, solar power, 12V +12V, the function is also each have advantages and disadvantages. Solar energy: the advantage is not affected by wire and limitations, can be in a safe car anywhere, but solar energy as power source not greatly, in addition to the night, the built-in battery capacity is limited.

12V power supply: after installation can be full load continuous work, filtering effect can be better, but there will be annoying wire placement, occupying a cigarette lighter will also affect the other with the use of electrical appliances. +12V solar power: This is a more reasonable combination, advantages of the above two power source.

In general, must be working for a long time, cleaner power purification effect is better, no matter what kind of power source, the main principles of them are the air inhaled through the filtering in the release, to purify the fine particles, so the priority among priorities filtering ability is screen.

These views are important,if you want to your car more better,you need choose good obd2 connector to equipped with your car.

Ford VCM II Description:
The VCM II is the new Ford OEM diagnostic tool.It provides dealer-level diagnostics using the IDS software.OEM Level Diagnostic interface support ford vehicles from 1996 to 2013.

Multi-Language:
English,Spanish,French,Italian,Russian,German,Denish,Polish,Finnish,Dutch,Czech,Portuguese,
Japanese,Swedish,Turkish,Greek

FORD VCM II Features:
1. The VCM II is the new Ford OEM diagnostic tool. It provides dealer-level diagnostics using the IDS software.
2. The VCM II is the brand new diagnostics interface from Ford for use with the Integrated Diagnostics Software (IDS).
3. The VCM II and IDS, along with a dedicated laptop, provides full dealer diagnostic capabilities for most 16 pin Fords.
4. A fantastic new function of the VCM 2 is its ability to communicate wirelessly with your laptop or computer without any hardware or software upgrades.
This allows technicians to work on vehicles remotely while the VCM II is connected directly to the vehicle.
5. The VCM II will be required for all new 2013 Ford vehicles and is backwards compatible with most 16 pin Fords.
It supports the Vehicle Measurement Module (VMM) and new Customer Flight Recorder (CFR).
6. The VCM II has shock resistant rubber ends, making it suitable for garage and workshop environments.
7. The CFR replaces the Vehicle Data Recorder (VDR).
8. The CFR is an optional cable that allows the VCM II to monitor and record live data streams. This provides an advantage for technicians when diagnosing intermittent problems.

FORD VCM II Function:
* Automatic vehicle recognition
* Read & Clear Diagnostic Trouble Codes (DTCs)
* Live Data-stream with Recording & Playback Functions for Main ECUs
* Guided Fault Finding
* New Software Re-flash for Existing ECUs
* Programming & Installation of new ECUs (PCM, ABS, Instrument Cluster, Air Bag, Fuel Pumps, etc.)
* Program New Keys
* Injector Coding
* Set, Adjust or Remove Speed Governors
* DPF Regeneration
* Brake Bleeding
* Steering Angle Resets
* All Other Dealer Functions

FAQ:
Q: What is the difference between VCM and FORD VCM II?
A: VCM do not support VMM, but VCM II support VMM as well as CFR

FORD VCM II Packing:
* VCM2 interface ×1
* OBD2 cable ×1
* USB cable ×1
* CD-DVD (Software IDS v84) ×2
* Plastic box ×1

The car’s engine oil appears the phenomenon of excessive consumption

Oil consumption is too large is usually the following reasons: the oil into the combustion chamber participates in the combustion and oil leakage. The oil can enter the combustion chamber of engine components, mainly because of serious wear gap is too large, or the engine oil pressure is too high. But the oil leakage is mainly because the gasket harden aging, valve stuck.

In general the old older vehicles, there will be not sealed gasket aging. Lubricating oil is normally consumed in good condition, but only in poor condition when, automobile tail gas will discharge smoke, in fact, this means that the lubricating oil consumption is too large. Usually the vehicle traveling 10000 kilometers to the normal loss of quantity of oil should be within 1L. General car oil capacity at about 4L, when the oil level dipstick marking reached MIN, lack of engine oil but 0.5-1L. If the car oil within ten thousand kilometers of loss is a normal loss within 1L, it is not considered fault.Failure of the above, should go to the repair shop for repairs.

Good maintenance play an important role in car,but obd2 connector are necessary.

Ford VCM II Description:
The VCM II is the new Ford OEM diagnostic tool.It provides dealer-level diagnostics using the IDS software.OEM Level Diagnostic interface support ford vehicles from 1996 to 2013.

New Ford VCM II ( Word %100 ) with latest software:IDS V84

FORD VCM II Features:
1. The VCM II is the new Ford OEM diagnostic tool. It provides dealer-level diagnostics using the IDS software.
2. The VCM II is the brand new diagnostics interface from Ford for use with the Integrated Diagnostics Software (IDS).
3. The VCM II and IDS, along with a dedicated laptop, provides full dealer diagnostic capabilities for most 16 pin Fords.
4. A fantastic new function of the VCM 2 is its ability to communicate wirelessly with your laptop or computer without any hardware or software upgrades.
This allows technicians to work on vehicles remotely while the VCM II is connected directly to the vehicle.
5. The VCM II will be required for all new 2013 Ford vehicles and is backwards compatible with most 16 pin Fords.
It supports the Vehicle Measurement Module (VMM) and new Customer Flight Recorder (CFR).
6. The VCM II has shock resistant rubber ends, making it suitable for garage and workshop environments.
7. The CFR replaces the Vehicle Data Recorder (VDR).
8. The CFR is an optional cable that allows the VCM II to monitor and record live data streams. This provides an advantage for technicians when diagnosing intermittent problems.

FORD VCM II Function:
* Automatic vehicle recognition
* Read & Clear Diagnostic Trouble Codes (DTCs)
* Live Data-stream with Recording & Playback Functions for Main ECUs
* Guided Fault Finding
* New Software Re-flash for Existing ECUs
* Programming & Installation of new ECUs (PCM, ABS, Instrument Cluster, Air Bag, Fuel Pumps, etc.)
* Program New Keys
* Injector Coding
* Set, Adjust or Remove Speed Governors
* DPF Regeneration
* Brake Bleeding
* Steering Angle Resets
* All Other Dealer Functions

FAQ:
Q: What is the difference between VCM and FORD VCM II?
A: VCM do not support VMM, but VCM II support VMM as well as CFR

FORD VCM II Packing:
* VCM2 interface ×1
* OBD2 cable ×1
* USB cable ×1
* CD-DVD (Software IDS v84) ×2
* Plastic box ×1

You should check the chassis whether is damaged when you traveling come back

In traveling the mountain road or bad road, the mud and other dirt easily attached to the chassis, and even some of the gravel constantly banging chassis also make protective layer peeling off the chassis, the chassis is a great possibility of corrosion.

If the chassis guide ring, steering wheel shake, vehicles parked position the presence of oil and so the phenomenon, it shows the chassis has been damaged. Some minor touch scratch also causes a slight leak oil pan, etc., these are the owners themselves cannot be detected early detection.So, if you have scraped through the end, even if there is no obvious sense, also advised owners to professional 4S shop check.

First of all, you want to thoroughly clean the chassis, the chassis must wait until after cleaning the water on the dry, rust preventive care can do. After cleaning is completed, they are not in a place such as exhaust pipes spray, suspension systems, covering up, then fitted to chassis paint spray gun at a distance of 25-35 cm from the chassis back and forth slowly and continuously sprayed two or three times, after which you can spray do ten minutes drying.

If this maintenance information can make your car healthy,so following obd2 connectorcan make your car more better.

BMW INPA K+DCAN Cable Description:
Interface USB OBD2 for BMW – INPA/Ediabas – K+DCAN allows full diagnostic of BMW from 1998 to 2008 (all functions as in OMNITEC interface). Build in 2 lines K and D-Can magisterial.

BMW INPA K+DCAN Features:
read and delete errors
adaptations
driver programming
applu coding
and others…
BMW INPA K+DCAN Supports protocols:
1. Fast magistral D-CAN and PT-CAN (500 kbit/s)
2. Slow magistral K-CAN (100 kbit/s)
3. Standard for BMW protocol (for BMW OBD interface).

BMW INPA K+DCAN for:
E60, E61 od 03/2007
E83 od 09/2006
E81, E87 od 03/2007
E90, E91, E92, E93 od 03/2007
E70 (new model X5)
R56 (new model MINI)
PT-CAN, K-CAN – fully switchable speed of migistral CAN – ou
can diagnose driver withtou any car

BMW INPA K+DCAN Cable Relative Cables:
INPA k+D can for BMW k+D can interdace
2+2 Adaptor For old Audi diagnostic cable
Volvo Serial Diagnostic Cable
VOLVO Serial Diagnostic Cable
OP-COM Diagnostic Cable
Diagnostic cable vag k+can commander