Side portions of the tire is guaranteed far from the tread to the tire bead rubber layer frame, if wrong operation while driving, such as automobile at high speeds, the tire is run over stones damaged, thereby causing the tire burst; another example , parking close to the road sub-teeth, which can cause tire bulge or generate rub crack traces. This is due to exposure to the road shocks caused by the constant bending twist.If the tire side portion burst tire repair is not possible, it is best replaced with new tires.
Solution:Pay attention to the correct operation when driving
1.Grasp the speed, on the road encounter rocks and sharp things timely escape.
2.When parking, try a little further away from the curb to avoid rubbing marks.
3.Unable to repair should be timely replacement tires.
When you hit the brakes when driving on a flat road,if always feel the road conditions or the steering wheel to one side,sometimes don’t hold it seems unable to move forward, then, don’t go,you’d better get off and check the depression degree of the tire,even if do not know the correct tire pressure also just as well,as long as four tire contact with the ground depression in one centimeter of words, still can continue to use.
These views are important,if you want to your car more better,you need choose good obd code scanners to equipped with your car.
OP-COM is a PC based diagnostic program. It covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test, and supports remote, and key programming.The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples. The diagnostic inteface is USB port based, so there will be NO COMPATIBILITY ISSUES, with serial to USB converters. The speed of the communication over the USB-BUS is enough to handle the awesome speed of the High-Speed CAN-BUS systems, which is currently 500kbps. This is the main reason, why only the USB port based interface is available for CAN-BUS.
Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.
PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
Fault codes will be shown with all available information:
CAN BUS OBD2 OP-COM Function:
Full fault code text description
Full status information (Present, Not present, Intermittent)
You can print out, save, or copy the fault codes to any other application.From the fault codes window, you can go directly to the measuring blocks window.
The program shows you measuring block information on many control module, you can choose anything from the list on your own.
The program supports many control units:
- Automatic Transmission
- Engine Cooling module
- Instrument Cluster
- Electronic Climate Control
- Body Control Unit
The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!
You can also run output tests on many controllers.
HSCAN – Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN – Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN – Single-wire, Low Speed CAN-BUS, 33.3 kbps
You will get a feedback on the state of the activated output. This will helps you to find the failed. Components more easily. With OP-COM, you can learn keys to immobiliser, and remote keys to the central door locking.You can also reset, and program the following immobiliser related items: ECM, BCM, IPC.
You will need the vehicle security code, which can be found on the CAR-PASS.You can also reset, and program the Service interval reminder on Astra-G, Zafira, Corsa-C, Meriva.You can code SAB6, and SAB8 airbags with the software.
The diagnostic inteface is USB port based, so there will be NO COMPATIBILITY ISSUES, with serial to USB converters.
The speed of the communication over the USB-BUS is enough to handle the awesome speed of the High-Speed CAN-BUS systems, which is currently 500kbps. This is the main reason, why only the USB port based interface is available for CAN-BUS.
Compared to the GM TECH2, which is the dealers tool (with a 32 MB card+CANdi interface), the price of OP-COM is quite affordable.
CAN BUS OBD2 OP-COM Language:
CAN BUS OBD2 OP-COM Package includes:
- 1pc x OP COM Interface
- 1pc x USB Cable
- 1pc x Software and Drivers CD