Analysis the rational purchase of the license plate frame

Remove rust material products. Try to choose the aluminum products, aluminum alloy material that is far easier than stainless steel to judge, for example see section and OK weight can be distinguished, of course, the price will not be too cheap. And so to say, if the use of cheap stamping steel sheet and after plating products, new time is really difficult to distinguish, the low cost of products low prices, but is often the most easy to rust, some 4S gift customized products is this.

Whether the license plate frame the network or the Auto Parts City buy, most are some text, pattern and other contents in the above printing. As for the young fashion owners, a license plate frame is personalized, if the 4S store a license plate frame, it is their shop in 99.99% ad. Feel shy, but judging from the law angle, the license plate frame are illegal, license plate frame no marks, letters and decorative pattern.

Prohibited the purchase detachable vehicle license plate frame with lock. In addition to interlocking detachable plate, more of a remote automatic covering or flop products, this kind of product is more has been authorities banned, if be investigated and dealt with may be subject to heavy fines, penalties and buckle car such as the severe punishment.

If this maintenance information can make your car healthy,so following VAG Diagnostic Tool can make your car more better.

GS400 Code Reader Description:
GS400 can read the generic and manufacturer specific DTC’s (Diagnostic Trouble Codes) stored in your vehicle’s EMS (Engine Management System). The EMS reports a fault by illuminating the ECL (Engine Check Light) on the dashboard. This is usually as a result of an electronic sensor failure. In a few seconds, identify the problem directly from the unit display. Once the fault has been repaired the DTC’s can then be erased from the EMS using the device. This will in turn reset the ECL.

GS400 Code Reader Advantages:
GS400 code readers that support Controller Area Network(CAN) protocol has arrived. The newmodel GS400 CAN OBD2 supports all OBD2 protocols, including the newly released Controller Area Network(CAN) protocol, allowing users to keep up with the latest development in scanning.

GS400 Code Reader Functions:
- Reads generic and manufacturer specific diagnostic trouble codes
- Erases diagnostic trouble codes
- Resets the engine check light
- Detects OBDII freeze frame information
- Retrieves the VIN (Vehicle Identification Number) on vehicles from 2002 that support Mode 9.
- Has a wider vehicle coverage as supports the new CAN-Bus standard
- Code definitions displayed on unit screen C no need to look them up!
- Memory/battery backup for off-vehicle data review and analysis
- Unit upgradeable via flash programming using supplied PC serial cable
- No batteries required for operation C power is supplied by the vehicle over the cable
- Easy to use with friendly menu interface
- Hot Keys for quick reading & erasing of codes
- Detachable and replaceable 16-pin OBDII cable
- Brand new from the factory

GS400 Code Reader Packing list:
- GS400 Code Reader
- Obd2 Cable
- Soft Nylon Carry Case

Cleaning leather seats by yourself

As everyone knows leather seats to good care than velvet seat, the main reason is that the leather seats not easily contaminated dirt, if dirty cloth scrub can be simple. However we want to tell everybody is, leather seats is to regular cleaning and care, no cleaning process we imagine that simple. Is a cycle and skill on the inside, if long-term is not clear or improper care, will easily cause irreparable damage to the leather seats.

After cleaning the skin surface of the seat, we have next to the plastic decorative plate cleaning, general leather seats and trim are the same color, the two colors will make people feel very uncoordinated gap. So after washing the skin surface to be cleaned on the seat trim, then brush can play a role in. As the first step, using the cleaning agent sprayed on the surface of the trim panel, resting after a few minutes, then brush scrub, finally with the slightly wet nanometer towel wipe it.

In addition to the seat, the car and some parts are made of leather material coated, in cleaning the seat can also be cleaning method and cleaning, the seat is the same, but it is important to note that these sites are basically nearby electronic equipment, such as a window control and near the car door lock handrail, special protection in the clean up here, spraying cleaning agent by hand from electron equipment, to prevent water from short circuit.

Master some common sense about car is important,but you need to know how to choose VAG Diagnostic Tool.

USB KKL VAG-COM For 409.1 Description:
The USB KKL VAG-COM For 409.1 diagnostic cable is usable for ISO9141 and KWP2000 transmission protocol like used for example by:
Volkswagen/Skoda/Audi/Seat

USB KKL VAG-COM For 409.1 Specification :
- This cable can not work if your car uses a protocol/ bussystem like VPW,PWM or Can-bus.
- Terminal Bus of communication
- Terminal L=Ignition for waking up car computing system (ECU: Engine Control Unit)
- Existed 3 different protocols with same OBD2 connector incl. ISO/KWP, VPW, PMW
- This K/L Diaqnostic interface & cables work on ISO/KWP (Kev Word Protocol) Iaunched after 1996 only
- Supported also ISO9141 protocol
- The cables may work with some versions of the Carsoft, but carsoft used a lot of different interfaces during the different versions and also had some custom interfaces.
- Product running as virtual comport, like many products it use a USB to Rs232 converter chip .But under special circumstances this can give some problems regarding time especially on the handshake lines.

USB KKL VAG-COM For 409.1 Functions:
Read & erase error code,log data e. g. speed, gasoline, consume engine-rotating (RPM: Rotation Per Minutes).

USB KKL VAG-COM For 409.1 Packing List:
1 x VAG COM 409.1 Cable
1 x Driver CD

After encountering a “vehicle” dangerous goods accident how to avoid the two accident?

If the traffic accident, so the first thing you need to do is to evacuate to safe areas, because you don’t know what is the transport of dangerous goods in the car, stay at the scene 1 more dangerous, more so in the first time to evacuate the scene after the accident the best evacuation, then call the police wait for rescue.

Because if the accident led to break it, so please leave the vehicle evacuated, evacuated to safer areas. Don’t think that safety in the car, if the dangerous goods transport vehicle accident of some toxic chemicals leakage, so your car is a gas chamber, so don’t think the car is a closed environment can ensure safety.

In the evacuation time to evacuate to the tuyere, it can guarantee the maximization of your safety. At the same time, the evacuation time use wet towel to cover your mouth and nose with better and safer. If the leak car transport of dangerous goods you feel things probably is going to explode, so please immediately down her head or squat down on her head, to ensure their own safety. In the evacuation time don’t care about property, many owners have fled back to evacuate with vehicle on the property, this is the most undesirable.

These views are important,if you want to your car more better,you need choose good VAG Diagnostic Tool to equipped with your car.

COM KKL VAG-COM For 409.1 Description:
This COM KKL VAG-COM For 409.1 diagnostic cable is usable for ISO9141 and KWP2000 transmission protocol like used for example by:
Volkswagen/Skoda/Audi/Seat

COM KKL VAG-COM For 409.1 Advantages:
- This VAG COM 409.1 cable can not work if your car uses a protocol/ bussystem like VPW,PWM or Can-bus.
- Terminal Bus of communication
- Terminal L=Ignition for waking up car computing system (ECU: Engine Control Unit)
- Existed 3 different protocols with same OBD2 connector incl. ISO/KWP, VPW, PMW
- This K/L Diaqnostic interface & cables work on ISO/KWP (Kev Word Protocol) Iaunched after 1996 only
- Supported also ISO9141 protocol
- The cables may work with some versions of the Carsoft, but carsoft used a lot of different interfaces during the different versions and also had some custom interfaces.
- Product running as virtual comport, like many products it use a USB to Rs232 converter chip .But under special circumstances this can give some problems regarding time especially on the handshake lines.

COM KKL VAG-COM For 409.1 Functions:
Read & erase error code,log data e. g. speed, gasoline, consume engine-rotating (RPM: Rotation Per Minutes).

COM KKL VAG-COM For 409.1 Packing List:
1 x VAG COM 409.1 Cable
1 x Driver CD

The door won’t open from the inside

The reason may be the car passenger or driver error operation opened the child lock. Child car lock is also called door child insurance, mainly in order to prevent children opening in the vehicle door, to avoid danger. The child lock according to the vehicle’s different brands, different location, some in the driver side door lock, some in the back door lock, also some in the console.

The vehicle does not start — gear is not correct. Some automatic models, when the parking time if no gear set in the P block, the next time you start when the ignition is not. This setting is to force the driver in the parking gear set in the P block, because many drivers habits after parking gear in N is blocked off, automatic transmission N block is neutral, and not in the car when the vehicle starts, the vehicle in the N block, if not on words vehicle the brake is moving, so that everyone in the car or the gear set in P.

There are some manual transmission models, if the ignition is not step on the clutch is also unable to ignition. The reason for this is because many set our chance in car to stall linked to the 1 gear or reverse gear habits, if the next time you start the vehicle to forget gearbox still hanging block, it is prone to jumping caused by scraping and other dangerous.

Cars make our life more and more convenient, but bring some trouble at the same time.However,we will solve it,if we use VAG Diagnostic Tool properly.

OBD2 VAG CAN Commander 5.5 Description:
OBD2 VAG CAN Commander 5.5 is a diagnostic tool for cars from Volkswagen Audi Group which using WP2000-CAN TP2.0 ,Full support of Audi A3/A8 – security code reading and odometer correction via OBDII.

VAG CAN Commander 5.5 Features:
Odometer correction via OBDII
Special functions about instrument clusters from VDO which allows changing of odometer value, reading security access code of immobilizer, reading eeprom and flash memory of instrument cluster.
TV-Activation function for MMI based vehicles (Audi A8, Audi A6, and Audi Q7)
Covers all electronic control units in vehicles (diagnostic addresses from 0×01 to 0×80).
This can allow of user to investigate and diagnosis some new units untouchable for remaining diagnostic tools
Manual definition of running diagnostic session ?not like remaining diagnostic tools always standard diagnostic session 0×89
Broadcast diagnostic request ?disable normal communication, clear DTCs, Logistic (transport) mode,…
Allows managing of brand new immobilizer units where is allowed programming of PIN, SKC, BGW, MAC.
Most of popular diagnostic requests identifications, coding, adaptations, DTCs and s.o.

VAG CAN Commander 5.5 Covered Vehicles List:
VW Golf5
VW Jetta (MY2006)
VW Caddy
VW Crossgolf
VW Touaran
VW EOS
VW Individual
VW Passat platform B6 (MY2006)
Seat Toledo (CAN)
Seat Leon (CAN)
Seat Altea
Seat Altea XL
Skoda Octavia II
Skoda Scout
Skoda Roomster
Audi A3
Audi A8
Audi A6 – odometer correction
Audi Q7 – odometer correction

VAG CAN Commander 5.5 Package List:
1pc x VAG CAN Commander 5.5+PIN READER Cable
1pc x CD Drive

The key won’t move — steering wheel lock

Many novice friends have encountered such a situation, the key is inserted into the key hole is ready to start, found the key to the screw does not move. In fact, this is the steering wheel automatically lock the car, almost all have this function, the main purpose of this function is to guard against theft. When a vehicle flameout, steering wheel to an angle, automatic lock will be triggered, if take the ignition key is the screw does not move.

Method for solving the steering wheel automatic locking is actually very simple, the key is inserted into the key hole, the left hand right hand twist the key to turn the steering wheel, until the keys can twist, the wheel is unlocked. Here, the editors should remind everyone, when found the key to the screw does not move, do not rigidly to turn the key, it is easy to cause the key to bend or break.

Some friends said that he bought a new car always refuses to start, check that the battery is dead, ask Is it right? Battery. In this case the first friends don’t worry, according to the editor’s experience, the battery will rarely lose power, probably because I forgot to turn off the lights off or parking stall in the car listening to the sound habits cause the battery power loss.

Nowadays,high quality car tools is becoming more and more less,so how to choose good car diagnostic tool is a challenge.

HEX USB CAN VAG-COM for 812.4 Description:
HEX USB CAN VAG-COM for 812.4 Compatible with the newest car models which require a direct CAN connection for diagnostics including all Golf-5 platform cars and latest Audi A3, A6 and A8, Q7, etc. Protocol timing indistinguishable from a real VAG/VAS tool. Works reliably even with “difficult” control modules such as the 1991-1994 1Z Audi TDIs and the 1993-1994 Audi 2.6L with Hella ECU. Built-In VAG-Saver functionality — instantly alerts the user if either the K/K1 line or the L/K2 line is shorted to Ground or Vbatt.Full support for dual-K lines found in “new” (B6/8E chassis Audi A4 and 2002+ Audi A6, A8, etc.

HEX USB CAN VAG-COM for 812.4 Advantages:
OBDII Can USB with the latest cars which require a direct CAN connection for diagnostics including all Golf-5 platform cars and latest Audi A3, A6 and A8,Q7.
Protocol timing indistinguishable from a real VAG/VAS tool.
The possibility that software is complete is on the xxxxx renewal, function all of, support the car type to 2007.

HEX USB CAN VAG-COM for 812.4 Diagnostics Type Including:
All Golf-5 platform cars (A5 platform) including:
2003+ VW Touran (1T chassis)
2004+ VW Golf (1K chassis)
2004+ VW Caddy (2K chassis)
2004+ Audi A3 (8P chassis)
2004+ Seat Altea (5P chassis)
2004+ Skoda Octavia (1Z chassis)
2005+ Seat Toledo (5P chassis)
2005+ Golf Plus (5M chassis)
2005+ Seat Leon (1P chassis)
2005.5+ Jetta (1K chassis)
2006+ Eos (1F chassis)
2003+ Audi A8 and A8L (D3 platform, 4E chassis)
2005+ Audi A6 (C6 platform, 4F chassis)
2005+ Audi A4 (“B7″ platform) (some control modules)
2005.5+ VW Passat (B6 Platform, 3C chassis)
2006+ Audi Q7 (4L chassis)
2007+ Audi R8 (42 chassis)
2007+ Audi TT (8J chassis)
2007+ VW Touareg (7L6 chassis) (“facelift”, built after Nov. 30 2006)

HEX USB CAN VAG-COM for 812.4 Functions:
- USB connector plugs into most modern laptops.
-works with the latest cars which require a direct CAN connection for diagnostics including all Golf-5 platform cars and latest Audi A3, A6 and A8.
- Protocol timing indistinguishable from a real VAG/VAS tool. Works reliably even with “difficult” control modules such as the 1991-1994 1Z Audi TDIs and the 1993-1994 Audi 2.6L with Hella ECU.
- Built-In VAG-Saver functionality — instantly alerts the user if either the K/K1 line or the L/K2 line is shorted to Ground or Vbatt.
- support for dual-K lines found in “new” (B6/8E chassis Audi A4 and 2002+ Audi A6 — no VAS- 6017 required — no manual switches.
- backward compatible with older cars using a single K-line or K plus L.
- Bi-Color (red/green) status/activity LED

HEX USB CAN VAG-COM for 812.4 Packing List:
1 xCable
1 x CD

The conventional equipment of car

Because now more serious air pollution, so the rain and snow mixed with large amount of pollutants in the car, car paint for corrosion is very serious. Vehicle if long time park in the parking lot, the car paint will accelerate the aging. If the vehicle is not used for a long time, recommended set of the last “sewing”, not only can corrosion barrier and the vehicle paint, also can prevent dust, the car paint is a kind of effective protection.

If in some snow frequent and very low temperature of the special area, the road may be longer time of snow and ice, this time in addition to dress up snow tires, when necessary use anti-skid chains, effectively improve the traffic safety in a world of ice and snow.

Parking heater. Its working principle is very simple, is to use a separate heating device, the antifreeze vehicle the original pipeline through the heating device to make the temperature rise, then the blower control the car itself will be heated air to the inside of the vehicle to improve the temperature inside the car through the control device is added, and stop automatically after reaching a certain temperature.

If this maintenance information can make your car healthy,so following VAG Diagnostic Tool can make your car more better.

USB KKL VAG-COM For 409.1 Description:
The USB KKL VAG-COM For 409.1 diagnostic cable is usable for ISO9141 and KWP2000 transmission protocol like used for example by:
Volkswagen/Skoda/Audi/Seat

USB KKL VAG-COM For 409.1 Specification :
- This cable can not work if your car uses a protocol/ bussystem like VPW,PWM or Can-bus.
- Terminal Bus of communication
- Terminal L=Ignition for waking up car computing system (ECU: Engine Control Unit)
- Existed 3 different protocols with same OBD2 connector incl. ISO/KWP, VPW, PMW
- This K/L Diaqnostic interface & cables work on ISO/KWP (Kev Word Protocol) Iaunched after 1996 only
- Supported also ISO9141 protocol
- The cables may work with some versions of the Carsoft, but carsoft used a lot of different interfaces during the different versions and also had some custom interfaces.
- Product running as virtual comport, like many products it use a USB to Rs232 converter chip .But under special circumstances this can give some problems regarding time especially on the handshake lines.

USB KKL VAG-COM For 409.1 Functions:
Read & erase error code,log data e. g. speed, gasoline, consume engine-rotating (RPM: Rotation Per Minutes).

USB KKL VAG-COM For 409.1 Packing List:
1 x VAG COM 409.1 Cable
1 x Driver CD

Car steering wheel cover

Steering wheel cover the biggest drawback is slipping, and dovetail products also can cause certain effect to control, therefore we do not recommend to buy. If you must adhere to need, to choose the larger friction inside at the time of the selection, installation will not be slipping situation.

Steering wheel cover and the wheel size to fit, do not outweigh the steering wheel or is installed later not dovetail, this will also bring safe hidden trouble. In addition the steering wheel cover after installed, feel should be appropriate, not too thick, so as not to affect the grip and firmness, causing potential safety problems. Also cannot too slippery surface, such as the woolly material steering wheel cover, we do not recommend, slipping not grasping the phenomenon is likely to use, and check before use steering wheel cover the surface of the work, to see whether there are some hard line or hard fold, lest use of scratch palm.

Here we are again, if no special dissatisfaction of the steering wheel style and feel, we do not recommend the use of steering wheel cover, because many hidden safety problems. If you think the steering feel is not good, can consider leather sewing by hand steering wheel cover, sewing good steering wheel lock setting good, feel is good, also won’t appear slipping safety hidden danger. If only because the morning drive wheel frozen hand, may wish to consider the morning drive with a non slip gloves, warm and anti-skid, also save to buy a link direction, is a good choice.

These views are important,if you want to your car more better,you need choose good VAG Diagnostic Tool to equipped with your car.

Autel GS500 Description:
Autel GS500 is the best solution to troubleshoot all 1996 and newer OBD2 Compliant vehicles. The gs500 code scanner tool delivers all nine OBD-II test modes,retriving live engine datastreanm and parameters to enable technicians accurately diagnose the toughest problems.

Autel GS500 Features & Benefits:
1. Reads & clears generic OBD II trouble codes (including pending codes)
2. Turns off check engine light(MIL)
3. Displays Generic Codes P0, P2, P3, U0 and Manufacturer Specific Codes P1, P3, and U1
4. Displays OBD2 monitor and I/M readiness Status
5. Detects OBD-II Freeze Frame Information
6. Reads live PCM data stream
7. Displays live O2 sensor test data
8. Performs Modules Present Test
9. Supports CAN(Controller Area Network) and all other current OBD-II protocols
10. Built-in OBD-II DTC lookup library
11. State Emissions Check(OBD2)
12. Retrieves Vehicle information (VIN, CID and CVN)
13. Determines the malfunction indicator lamp (MIL) status
14. Code definitions displayed on unit screen
15. Unit updateable via Internet
16. Highly reliable and accurate
17. Easy-to-read crystal-clear backlit large 128 x 64 LCD display(2.8x 1.7)
18. Safely communicates with the on-board computer

Supports Communication Protocols:
1. C.A.N. (Controller Area Network)
2. J1850PWM
3. J1850VPW
4. KWP 2000 ISO 14230-4
5. ISO 9141

Autel GS500  Contents:
1. GS500 unit
2. Obd2 Cable
3. Serial PC Cable
4. User`s Manual & DTC Library software CD
5. Soft Nylon Carry Case

How to choose car seat in winter?

Driving in winter, the most painful than those equipped with leather seats but no seat heating function of friends. Sitting in the leather seats, cold, pain feeling lets you forgot leather seats brought a sense of quality, so the cold winter installation seat in winter has become the most effective way to improve the situation.

Before winter cushion for drivers to provide warm and comfortable ride, safety is the most important. The cushion, safety is the largest slip occurring in use, so the inner material can fit in the seat surface and there is no friction slip is the first optional elements. Secondly, the passenger seat contact the same outside to avoid slipping phenomenon, so we should touch at the time of purchase, or to sit in that feeling, to choose their own like style without slippage.

In addition, the back cushion is used for fixing the elastic belt and buckle is also key, which determines the quality of the installation and use of the firmness and durability, so some buckles or elastic band coarsely do not choose, to choose the good elastic resilience, and some of the best feels sturdy. In addition to purchase link, the installation will also have to pay special attention, inexperienced owners try not to install their own, because some buckle position if not installed correctly will make a secure setting down, causing slip.

With the development of the city, more and more people own a car, the car also completed the transformation from the original luxury become family necessities. With the widespread use of the automobile, the problems attendant also continue to occur.So VAG Diagnostic Tool is important.

GS400 Code Reader Description:
GS400 can read the generic and manufacturer specific DTC’s (Diagnostic Trouble Codes) stored in your vehicle’s EMS (Engine Management System). The EMS reports a fault by illuminating the ECL (Engine Check Light) on the dashboard. This is usually as a result of an electronic sensor failure. In a few seconds, identify the problem directly from the unit display. Once the fault has been repaired the DTC’s can then be erased from the EMS using the device. This will in turn reset the ECL.

GS400 Code Reader Advantages:
GS400 code readers that support Controller Area Network(CAN) protocol has arrived. The newmodel GS400 CAN OBD2 supports all OBD2 protocols, including the newly released Controller Area Network(CAN) protocol, allowing users to keep up with the latest development in scanning.

GS400 Code Reader Functions:
- Reads generic and manufacturer specific diagnostic trouble codes
- Erases diagnostic trouble codes
- Resets the engine check light
- Detects OBDII freeze frame information
- Retrieves the VIN (Vehicle Identification Number) on vehicles from 2002 that support Mode 9.
- Has a wider vehicle coverage as supports the new CAN-Bus standard
- Code definitions displayed on unit screen C no need to look them up!
- Memory/battery backup for off-vehicle data review and analysis
- Unit upgradeable via flash programming using supplied PC serial cable
- No batteries required for operation C power is supplied by the vehicle over the cable
- Easy to use with friendly menu interface
- Hot Keys for quick reading & erasing of codes
- Detachable and replaceable 16-pin OBDII cable
- Brand new from the factory

GS400 Code Reader Packing list:
- GS400 Code Reader
- Obd2 Cable
- Soft Nylon Carry Case

Check the engine compartment every week

Vehicles in the long time idle, don’t put food or drink in the compartment. Open the seal of the food and beverage in the car in three or four days will be moldy, this will cause the air pollution inside the car. In the preparation of idle vehicles, the car with food and drink out of the car, don’t leave any perishable goods in the car.

The engine room is a very troublesome thing into the mouse, easily lead to the car line is bad bite, may also because of food residue off in the engine compartment cause trouble, more terrible is the pyramid scheme to your car when starting a family and live for a long time. There is, cats and dogs may also into the engine compartment or under the car, and they drive if not found, probably the tragedy.

Try to check the engine compartment regularly , which can examine have small animal other mice or enter, also can have a look the stock of oil, antifreeze and oil is enough, do not need to use when you. In fact, more than the engine compartment needs attention, the mouse may also enter into the exhaust pipe, regular inspection to every corner of the vehicle are detected.

Cars make our life more and more convenient, but bring some trouble at the same time.However,we will solve it,if we use VAG Diagnostic Tool properly.

SI-Reset VAG OBD2 Description:
Opel Astra build after 1998, Zafira build after 1998, Corsa build after 2000

Operating Instructions:
- Plug the Device into the OBD2 socket of the car
- All LED`s will blink and than stay on
- Turn ignition key to enable the board electronic but don`t turn on the motor
- Press the button for the operation you want to perform shortly
- The LED of the choosen operation will light and the other Led`s will be off
- LED`s will perform a light chain which means reset is done

Functions:
- Reset Inspection Intervall
- 15.000 km or 1 year
- 15.000 km or 2 years
- 30.000 km or 2 years (LONGLIFE)

SI-Reset VAG OBD2 Packing list:
Service Intervall Reset Unit with diagnostic connector

Long time park the vehicle should pay attention to protect the body surface paint

Long time park the vehicle should pay attention to protect the body surface paint. Because the leaves, dust, broken branches will damage even rust on the car paint. Who are didn’t like watching their own car dirty, long before the park, to do a thorough cleaning of the body, a bath for the car body waxing, to do a beauty, this helps to prevent the body from corrosion and oxidation.

Park place is also very particular about the vehicle, if the vehicle is idle for two or three months or longer, try to park his car in the garage, the garage can not only let the car because from the wind, sun, rain violation, will avoid the fallen leaves, broken branches, foreign object damage the car paint.

If not parked in the garage, you can try to find a cool dry place Park, had better not park under a tree or downstairs. Because the encounter rainy and windy weather, branches, leaves or upstairs falling objects can fall harm on the body. So, long time in outdoor parking can consider the use of sewing, the vehicle cover, reduce dust and other damage to your car.

If this maintenance information can make your car healthy,so following car diagnostic tool can make your car more better.

VAG KM IMMO Tool Description:
VAG KM+IMMO tool by OBD2 can program Volkswagen and Skoda cars from year 2006.06 by OBDII diagnostic. You can do odometer correction, PIN code reading, EEPROM reading/writing with VAG KM IMMO tool by OBD2. Newest version: 1.7.9. We supply the VAG km+immo tool by obd2 with unlimited technical support.

New version update:
New update version: V1.7.3
Fix bug of change km on A4.
Fix bug of communication with car. Latest PC Software version: 1.6.9 beta (2011-11-29)
Add algo for NEC24c64. 1.6.8 beta (2011-11-25)
Add Immo Off function for RB8
Fix a problem of change km on A3/TT 1.6.7 beta (2011-11-16)
* Require firmware V2.0.3 or above
Fix a problem of change km on some RB8 dash.
1.6.3 beta (2011-10-21)
Add support to A3/TT.
Please update firmware to V2.0.2
Fixed a problem of can’t change km with A5,Q5,A4

VAG KM IMMO Tool Notice:
There is a problem in HID driver code of original VAG IMMO K+CAN TOOL and CDC32xx cables, when you upgrade the device,
it may cause data loss to device, and resulting device not work. We have released a new version to solve this problem, we add 4th
generation key functions to show our regret. We suggest you to upgrade as soon as possible to solve this problem. If damage
occurs during the upgrade process, please send the product back to the original manufacturers for repair and send back to you,
But we do not bear the freight.

VAG KM IMMO Tool FAQ:
Q:What is the difference between VAG KM+IMMO TOOL BY OBD2 and Micronas OBD TOOL (CDC32XX) V1.6.6
A:Here have two pics declare this question.

VAG KM IMMO Tool Packing List:
1pc x VAG KM IMMO TOOL
1pc x CD Driver