Peugeot Lexia 3 Citroen with five cables

Peugeot Lexia 3 Citroen with five Cables Description:
Dealer’s diagnostic scanner for comprehensive diagnosis for Citroen and Peugeot cars. You can do all as an authorized Dealer does. This diagnostics software allows you to perform complete diagnostics of all from 1995 till present models. Diagnostics is performed via OBD II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).

  • Retail price: US$142.84       Stock of Products:In Stock
  • Buy Now: US$ 99.99        You save: US$42.85

Peugeot Lexia 3 Citroen Function:
Unlike other universal car scanner tools which only read fault codes, this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).
Read identification
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc…
Read fault codes
Displays all stored and pending fault codes with complete description (e.g. “Rail pressure – too low pressure”).
Program supports report printing or copy to clipboard.
Clear fault codes
This function clears all stored fault codes and other diagnostic information.
Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.
Actuator test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc
Programming functions/Adaptation
This feature is of great importance in all vehicles because systems like Engine control units, Immobilizers, Airbags, Alarms, Body Control Units, and some others, require you to perform reset or programming procedures after car repair is done, or even configuration after replacing broken Control Unit.
Hardware and software requirements
Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP with the latest service pack installed.
If customer requires, we can prepare ready to work PC.

Peugeot Lexia 3 Citroen Languages:
PPO Software supported language:
English, Chinese, German, French, Japanese, Russian, Arabia, Spanish, Turkish, Danish, Iranian, Greek, Israel, Hungary, Indonesian, Italian, Dutch, Norwegian, Polish, Portuguese, Finnish, Slovenian, Swedish, Czech, Croatia, Thai.
Lexia Software supported language:
English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech.

Peugeot Lexia 3 Citroen Package Includes:
Main unit (1 pc)
Diagnostic cable (2 pcs)
USB cable(1 pcs)
Power cable clips( 1 pair)
Latest version Software CDs( Lexia & PPO) (1 pcs)

by   Khan, September 17, 2013
hi, if this tool can programming keys ?
Reply:
Dear Sir,
Yes,it can program keys,but we do not provide car pin code and techinical about how to program keys,please understand. Thank you and best regards!
Service team

by   MONTESINOS, September 5, 2013
Hi, can PP2000 diagnose or deal with my peugeot 407 HDi 1.6 diesel engine model 2008?
Reply:
Hi,dear friend
Yes,it can diagnose peugeot 407 in 2008 year.
thank you and best regards!

Car washing device installation

Hand washing device installation is relatively simple, but the automatic car washing device installation should slightly some trouble, first of all to pipeline connected with the water tank, and the pipeline is long, therefore need to spend some time it will be completely shun. In addition to fixed with different nozzle adapter is different. The official before use, car washing manual for the need to rely on continuous inflation increased washing barrel pressure difference between inside and outside, in order to achieve the spraying effect. Compared with automatic washer of preparation work to a lot of effort, as long as the plug in the power switch is turned on.

Manual washer in the play enough gas, water column spray distance of about 4m, because it is relying on advance up to maintain strength, thus inflating a water state can maintain half minutes, then efforts will continue to weaken, again. And the injection form manual washing device is relatively single, want to fog, you need to replace the nozzle.

Washing process, manual washer is laborious, and effect than automatic washer worse. But automatic washer also has one of the biggest drawbacks is the fee, water is too large. To erase the hard soil, rely on the washer rinse is certainly not, or to daub a few car cleaning agent to clean the dirt. Two car washing device can eventually be vehicle washing, but hand washing is more difficult than some, with automatic washer to be longer.

Cars make our life more and more convenient, but people think automobile beauty and maintenance are very trouble. Actually otherwise, as long as you use the right way and use appropriate obd2 connector,not only can save your time, and at the same time also can make your car more beautiful.

Peugeot Lexia 3 Citroen With four Cables Description :
LEXIA-3 Interface latest version, works for both Citreon and Peugeot! Dealer diagnostic scanner for comprehensive Citroen and Peugeot cars diagnostic. You can do all as a authorized dealer does.This diagnostics software allows you to perform complete diagnostics of all from 1995 untill present models. Diagnostics is performed via OBD-II connectoror via manufacturer-specific connector. This item 100% works fine. It is tested by tens of users.

Peugeot Lexia 3 Citroen With four Cables Features
Unlike other universal car scanner tools which only read fault codes, this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).
Read identification
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc… Read fault codes
Displays all stored and pending fault codes with complete description (e.g. “Rail pressure – too low pressure”). Program supports report printing or copy to clipboard. Clear fault codes
This function clears all stored fault codes and other diagnostic information.
Auto-scan (complete car scan/test) Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.
Actuator test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc Programming functions/Adaptation
This feature is of great importance in all vehicles because systems like Engine control units, Immobilizers, Airbags, Alarms, Body Control Units, and some others, require you to perform reset or programming procedures after car repair is done, or even configuration after replacing broken Control Unit.
Hardware and software requirements Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP with the latest service pack installed.
If customer requires, we can prepare ready to work PC.

Peugeot Lexia 3 Citroen Software supported language :
English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech

Automobile maintenance industry disputes has increased every year

First, the maintenance is not timely. Some of the rapid expansion of 4S shop sales, while follow-up services do not pay attention, professional maintenance staffing shortage, resulting in customer delivery vehicles for repairs after an agreed period of time is difficult to repair. Second, the repair failed.

Some car repair business in the repair, use of counterfeit parts, accessories posing with domestic imported parts, and even the use of substandard parts, resulting in rework and thus lead to disputes. Third, the operation is not standardized. Most repair shops in the replacement auto parts, do not replace the old parts will be handed to the owner or owners of show that car repair business owners think that there is fraud. Fourth, billing irregularities.

Suggestions: First, establish norms and automotive repair industry job maintenance contract template for auto repair businesses operating standards; Second, auto repair enterprises to strengthen self-discipline, standardize repair operations; Third, owners should raise awareness of prevention, the signing of the contract expressly repair maintenance the scope, requirements and payment standards, performance of the contract to avoid the disputes.

If this maintenance information can make your car healthy,so following obd code scanners can make your car more better.

Peugeot Lexia 3 Citroen with five Cables Description:
Dealer’s diagnostic scanner for comprehensive diagnosis for Citroen and Peugeot cars. You can do all as an authorized Dealer does. This diagnostics software allows you to perform complete diagnostics of all from 1995 till present models. Diagnostics is performed via OBD II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).

Peugeot Lexia 3 Citroen Function:
Unlike other universal car scanner tools which only read fault codes, this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).
Read identification
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc…
Read fault codes
Displays all stored and pending fault codes with complete description (e.g. “Rail pressure – too low pressure”).
Program supports report printing or copy to clipboard.
Clear fault codes
This function clears all stored fault codes and other diagnostic information.
Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.
Actuator test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc
Programming functions/Adaptation
This feature is of great importance in all vehicles because systems like Engine control units, Immobilizers, Airbags, Alarms, Body Control Units, and some others, require you to perform reset or programming procedures after car repair is done, or even configuration after replacing broken Control Unit.
Hardware and software requirements
Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP with the latest service pack installed.
If customer requires, we can prepare ready to work PC.

Peugeot Lexia 3 Citroen Languages:
PPO Software supported language:
English, Chinese, German, French, Japanese, Russian, Arabia, Spanish, Turkish, Danish, Iranian, Greek, Israel, Hungary, Indonesian, Italian, Dutch, Norwegian, Polish, Portuguese, Finnish, Slovenian, Swedish, Czech, Croatia, Thai.
Lexia Software supported language:
English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech.

Peugeot Lexia 3 Citroen Package Includes:
Main unit (1 pc)
Diagnostic cable (2 pcs)
USB cable(1 pcs)
Power cable clips( 1 pair)
Latest version Software CDs( Lexia & PPO) (1 pcs)